New Balance 1800, 1600 owner manual Programs

Page 20

1600 PROGRAMS

ON/OFF SWITCH: Turn on the ON/OFF switch located on the front of the Treadmill. The switch will light up if there is power to the Treadmill.

PRESS POWER: This turns the Computer power on. The Treadmill Belt will not start unless POWER is pressed first. WT will appear in the dot matrix and the previous user weight will appear in the Calories window. Enter weight of user using the Speed or Incline arrows. Press ENTER to confirm weight.

MANUAL MODE: If you elect to operate the Treadmill in Manual Mode, press START. The Treadmill will start at 0.5mph after a 3,2,1 countdown.

PROGRAM MODE: After pressing POWER, press the desired program using the program Quick Keys or press SELECT to choose one of the 18 programs. Note: The program layout appears in the dot matrix display. Press ENTER to verify the selection. Press START to begin the program. All programs have ten, one-minute segments. The program repeats the ten, one-minute segments until the user presses STOP. An explanation of the programs follow:

1.Hill Walk: This is an elevation program that goes from 0% to 3% grade. The speed is controlled by the user and the Treadmill will start at 0.5mph. Each minute, the elevation changes.

2.Mountain Pass: This is an elevation program that goes from 0% to 5% grade. The speed is controlled by the user.

3.Pikes Peak: This is a challenging elevation program that goes from 0% to 7% grade. The speed is controlled by the user.

4.Fat Burn: This is an interval elevation program where the elevation alternates between 0% and 5%. The user controls the speed.

5.Walking: This is a speed program that varies between 2.5mph and 3.3mph. This is an excellent program for intermediate walkers. The user controls the elevation.

6.Jogging: This is a speed program that varies the speed between 4.0mph and 4.8mph. This is a good program for beginner joggers and very fast walkers. The user controls the elevation.

7.Cardio Burn: This is an interval elevation program that alternates between 3% and 8%. The user controls the speed.

8.Walking Interval: This is an interval speed program that has alternating rest and work intervals. The defaults are 2.5mph and 3.0mph. When a lower interval is changed, all the lower, or rest intervals go to this value. When the higher, or work interval is changed, all the work intervals go to this value. The Incline stays at zero during this program.

9.Jogging Interval: This is an interval speed program that has alternating rest and work intervals. The defaults are 5.0mph and 6.0mph. When a lower interval is changed, all the rest intervals go to this value. When the higher, or work interval is changed, all the work intervals go to this value. The Incline stays at zero during this program.

10.Hill Interval: This is an interval elevation program that has alternating rest and work intervals. The defaults are 0% and 3%. When a lower interval is changed, all the rest intervals go to this value.

When the higher, or work interval is changed, all the work intervals go to this value. The default Speed is 2.0mph and stays at at this speed during the workout.

11.Mountain Interval: This is an interval elevation program that has alternating rest and work intervals. The defaults are 1% and 7%. When a lower interval is changed, all the rest intervals go to this value. When the higher, or work interval is changed, all the work intervals go to this value. The default speed is 2.0mph and stays at this speed during the workout.

12.Target Distance: This program counts down the distance goal that the user sets before exercising. After confirming the program, the user enters the distance goal using the Speed or Incline arrow keys. Increments are 0.5 miles. Press ENTER to confirm the distance goal, press START, the Treadmill Belt starts and the user controls the Speed and Incline. The distance will count down in the Distance window.

13.Target Calories: This program counts down the calorie goal that the user sets before exercising. After confirming the program, the user enters the calorie goal using the Speed or Incline arrow keys. Increments are 10 calories. Press ENTER to confirm the calorie goal, press START, the Treadmill starts and the user controls the Speed and Incline. The calorie goal will count down in the Calories window.

14.Target Time: This program counts down the time goal that the user sets before exercising. After confirming the program, the user enters the time goal using the Speed or Incline arrow keys. Increments are 1 minute. Press ENTER to confirm the time goal, press START, the Treadmill starts and the user controls the Speed and Incline. The time goal will count down in the Time window.

15.Target Elevation Gain: This program counts down the elevation gain goal that the user sets before exercising. After confirming the program, the user enters the elevation gain goal using the Speed or Incline arrow keys. Increments are 10 feet. Press ENTER to confirm the elevation gain goal, press START, the Treadmill starts and the user controls the Speed and Incline. The elevation gain goal will count down in the Elevation Gain window.

16.User Programs 1-3:After selecting one of the user programs, press ENTER to confirm. Press ENTER again and adjust the Speed and Incline for segment one and press ENTER. Continue to adjust the Speed and Incline for each segment and press ENTER. Press START to begin the workout. If a Speed or Incline value is changed during usage, the Computer will store the value of the Speed and Incline at the end of each segment and will retain these values.

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 1600/1800 Treadmills Table of Contents Keep These Instructions Important Safety InstructionsRead all instructions before using this equipment Introduction Congratulations on Purchasing Your NEW Balance TreadmillComments or Questions Ordering Missing or Defective PartsUnit Warning LABELS/SPECIFICATIONS & Parts New Balance 1600/1800 SpecificationsSafety switch Fastener Pack ASSEMBLY/SETUP InstructionsParts Box Upright Assembly Console Base AssemblyAssembly is now complete Side Cap AssemblyMoving the Treadmill Setting UP Treadmill for USEFolding the Treadmill to allow removal of the shipping box Turning On the Treadmill Power Cord AssemblyLowering the Walking Deck To Lower the Treadmill Folding and Moving Your Treadmill for StorageTo Fold the Treadmill To Move the Treadmill Walking Belt Centering Taking Care of Your TreadmillWalking Belt Tension Lubrication Application CleaningWalking Belt and Deck Lubrication Safety Tips Electronics Operating Instructions For Your TreadmillQuick Guide Program Keys1800 1600DISPLAY Function Program FunctionPrograms 1800DISPLAY Function Program FunctionOn next Using the Pulse Function Complete Exercise Program Exercise GuidelinesKnowing the Basics When to Exercise See chart onAerobic Exercise HOW MUCH? HOW OFTEN? Measuring Your Heart RateClothing Tips to Keep YOU GoingHeart Rate Target Zone For Cardiovascular Fitness Heart 160 Rate Beats/ 150 MinWarm UP & Cool Down Stretches Quadriceps StretchCalf and Achilles Stretch Overhead/Triceps StretchBack Stretch Standing Hamstrings StretchButtocks, Hips and Abdominal Stretch Inner Thigh StretchTroubleshooting Guide Problem Cause CorrectionWorkout Progress Charts Additional Workout Progress Charts Parts LIST/EXPLODED View Item # Part Name QTYExploded View New Balance Fitness Equipment

1600, 1800 specifications

The New Balance 1800 and 1600 are two exceptional running shoes designed to cater to the needs of athletes and casual runners alike. Both models showcase New Balance's dedication to performance, comfort, and style while incorporating advanced technologies that enhance the overall running experience.

Starting with the New Balance 1800, this shoe is engineered for those who seek superior cushioning and support. One of its notable features is the Fresh Foam midsole, which is designed to provide a plush and responsive ride. The Fresh Foam technology is formulated with a unique geometric pattern that offers optimal cushioning without adding excessive weight. This makes the 1800 an excellent choice for long-distance runners who prioritize comfort during extended runs.

Another key characteristic of the New Balance 1800 is the synthetic mesh upper, which promotes breathability and a snug fit. This lightweight material allows for optimal airflow, keeping the feet cool and dry even during intense workouts. The shoe also features a supportive heel counter that locks the foot in place, ensuring stability and reducing the risk of injury.

On the other hand, the New Balance 1600 blends performance with a sleek design ideal for runners who appreciate speed. It features a responsive REVlite midsole, known for its lightweight properties and durability. REVlite technology provides cushioning that doesn't compromise on performance, making the 1600 a favorite among competitive runners.

The 1600 model also boasts a streamlined silhouette with a breathable engineered mesh upper, providing a secure fit while minimizing weight. Its fantastically flexible outsole, equipped with strategically placed rubber pods, ensures traction and grip on various surfaces, allowing runners to maintain their pace without slipping.

Both models highlight New Balance's commitment to superior craftsmanship, showcasing a robust design that withstands rigorous training. They also come in various colorways, catering to individual styles and preferences.

In conclusion, the New Balance 1800 and 1600 exemplify the brand's forward-thinking approach in creating shoes that enhance performance while delivering exceptional comfort. Whether you are a seasoned marathoner or a casual jogger, these models provide the perfect blend of technology, support, and style to elevate your running experience.
Top Page Image Contents