Assembly (Cont.)
3.(a.) Now find the "U" shaped handlebar. Align the holes in the handlebar with the holes on the top of each post, hand tighten the 4 handlebar screws.
(b.) Once all four screws are tightened by hand you can securely tighten the 4 flat head screws with the 5mm Allen wrench provided.
a |
| b |
Connect and push inside
tube to avoid being pinched
4.Push on the plastic covers that go over the handlebar joint as shown in the picture.
Push on
Plastic Cover
5.Using the 5mm Allen wrench, securely tighten 3 of the short button head screws with washers on the bottom of each support post.
Install Support Tube
Fastening Screws
and Washers
10