Cadence WLTL42570 user manual Symptom the Walking Belt Slows When Walked on

Page 17

i

4.SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON

a. Use only a ULdisted surge protector, rated at 15 arnp8, with a 14-gauge cord of five feet or less in length.

b.If the walking belt is o_,edlghtened, treadmill performance may decrease and the walking belt may be perrnanenlty d_roaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. The center Of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmilr for a few minute@. Repeat until the walking belt is properly tightened.

¢. If the walking belt still alows when walked on, please call our toll-free Customer Service Depadment.

5.SYMPTOM: THE WALKING BELT IS OFF-CENTERWHEN WALKED ON

a. If the walking belt has shifted to the left, first remove the key and

UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt c]ockwise, and the dgth bolt coun- terclockwise, 1/4 of a turn each. Be carefur not to overtlghten the walking belt. Plug in the power cord, insert the key and run the treagroiil for a few roinutes. Repeat until the walking bait is cen- tered.

b. If the walking belt has shifted to the dght, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear miler adjustroect bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to over- tighten the walking belt, Plug in the power cord, insert the key

and run the treadmill for a few minutes. Repeat until the walkthg belt is centered.

¢. If the walking belt allpo when walked on, first remove the key

and UNPLUG THE POWER CORD, Using the allenwrench, turnbeth rearrolleradjustmect beltsclocl_'_ise,I/4of a turn, When the walkingbeltIscorrecllytightened,you should be able tolifteach sideofthe walkingbelt3 to4 inchesof_thewaI_ng platform.Tn_ centerofthe walkingbertshouldjusttouch the welkingpi_orm. Be carefulto Keep thewalking beltcentered. Plug inthe power oord,Insertthe key and ru_ the treadmillfora few minutes.Repeat _nlttthe wa_ing belt_ pmpo_y tightened.

I@

Image 17
Contents Number Model No. WLTL42570Customer HOT Line Mon.-FrL, 6 a.m.-6 p.rn, MSTTable of Contents Page Waikin Before YOU BeginRtGHT Side CircuitConsole pJate Screw Extension Leg Screw AssemblyHandrail Washer Handrai Screw Wire Harness is not pinched Performant Lube TM Walking Belt Operation and AdjustmentHOW to Plug Power Cord Monitor Dispays Diagram of the ConsoleBarery Installation Page Exploded DRAWiNG--Model No. WLTL42570 Page Qty DescripUon Speed Minutes HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE HOW to Move the TreadmillSymptom the Power does not Turn on Maintenance and TROUBLE-SHOOTINGSymptom the Power Turns OFF During USE Make sure that the power cord is pluggedSymptom the Walking Belt is OFF-CENTERWHEN Walked on Symptom the Walking Belt Slows When Walked onAerobic Exercise Fat BurningHigh Parfonnance Athletfo Conditioning Warm-upInner Thigh Stretch Cool-downLimited Warranty Ordering Replacement PartsModel Number of the Product WLTL42570 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT