H2 =
Step 5. If setting is finished, press START to start running.
Step 6. If computer doesn’t receive heart rate input, major screen will show ” ♥? ” and incline won’t change any position until computer receives heart rate from handpulse or chest belt. If user’s heart rate doesn’t achieve set value (T.H.R), the treadmill will increase INCLINE height automatically till user achieves set value. Then treadmill will decrease INCLINE height.
U1 ~ U3 (USER SETTING)
Step 1. Press “PROGRAM” button to choose the U1~U3.
Step 2. Press “START” button to start running, user can press “FAST/SLOW” to adjust the speed, press “UP/DOWN” to adjust incline position.
Step 3. Before running, press “ENTER” button to set count down time. The range is from 10:00 to 99:00.
Step 4. User can set profile values by themselves. Press “ENTER” to set speed and incline values for the 20 columns.
Each section includes speed, press “FAST/SLOW” to adjust and incline, press “UP/DOWN” to adjust the incline.
Step 5. Press START to start running after setting, or during setting process. Console will automatically set speed and incline position. It will also save the settings.
Content of profile
Content of profile is speed value.
SPEED value＝ Max speed * percent of profile
INCLINE doesn’t have PROFILE, the value of incline will display in INCLINE window.
Preset program values as below:
|
| S1 | S2 | S3 | S4 | S5 | S6 | S7 | S8 |
| S9 |
| S10 | S11 |
| S12 | S13 | S14 |
| S15 | S16 | S17 | S18 |
| S19 |
|
| S20 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
P2 SPEED | 50 | 62.5 | 62.5 | 75 | 75 | 75 | 87.5 | 75 | 87.5 |
| 87.5 | 100 | 75 | 87.5 | 75 | 87.5 | 87.5 | 75 | 62.5 | 62.5 |
|
| 50 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P2 INCLINE |
| L1 | L2 | L3 | L4 | L4 | L5 | L4 | L5 |
| L5 |
| L6 | L4 |
| L5 | L4 | L5 |
| L6 | L5 | L4 | L2 |
| L2 |
|
|
| L1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
P3 SPEED |
| 50 | 62.5 | 62.5 | 75 | 87.5 | 100 | 100 | 100 |
| 100 |
| 100 | 100 |
| 100 | 100 | 100 |
| 100 | 100 | 87.5 | 75 |
| 62.5 |
|
| 50 | |
P3 INCLINE |
| L1 | L2 | L3 | L4 | L4 | L5 | L6 | L4 |
| L5 |
| L5 | L4 |
| L3 | L4 | L5 |
| L6 | L7 | L5 | L3 |
| L2 |
|
|
| L1 |
P4 SPEED | 50 | 62.5 | 62.5 | 75 | 75 | 87.5 | 75 | 75 | 87.5 |
| 62.5 | 75 | 87.5 | 75 | 75 | 100 | 75 | 87.5 | 62.5 | 62.5 |
|
| 50 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P4 INCLINE |
| L1 | L1 | L1 | L1 | L1 | L1 | L1 | L1 |
| L1 |
| L1 | L1 |
| L1 | L1 | L1 |
| L1 | L1 | L1 | L1 |
| L1 |
|
|
| L1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
P5 SPEED |
| 62.5 | 62.5 | 75 | 75 | 75 | 75 | 87.5 | 87.5 |
| 87.5 |
| 100 | 100 |
| 87.5 | 87.5 | 87.5 |
| 75 | 75 | 75 | 62.5 |
| 62.5 |
| 62.5 | ||
P5 INCLINE |
| L1 | L2 | L3 | L4 | L5 | L7 | L8 | L7 |
| L6 |
| L5 | L4 |
| L4 | L5 | L6 |
| L7 | L7 | L6 | L4 |
| L2 |
|
|
| L1 |
P6 SPEED | 50 | 62.5 | 62.5 | 75 | 87.5 | 62.5 | 62.5 | 87.5 | 62.5 |
| 75 | 100 | 62.5 | 75 | 100 | 62.5 | 75 | 87.5 | 62.5 | 62.5 |
|
| 50 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
P6 INCLINE |
| L1 | L2 | L3 | L4 | L5 | L3 | L4 | L6 | 12 |
| L4 | L7 |
| L3 | L4 | L8 |
| L3 | L4 | L6 | L4 |
| L2 | Z9 | L1 | |||
|
| L3 |
|
|
|
|
|
|
| ||||||||||||||||||||
For example: Setting 10MPH is P2 high speed, the speed will calculate through above formula and