Assembly Instructions
ASSEMBLY PACK CHECK LIST
5/16" x 1/2" Button Head Socket Screw (12pcs) 3/8" x 2" Thumb Head Socket Screw (2pcs)
M6 x 25 m/m Button Head Socket Screw (8pcs)
6 x14 x1T Flat Washer (8pcs)
Combination M5 Allen Wrench & Screwdriver(1pc)
Assembly
■MAIN FRAME ASSEMBLY
1.Remove all parts from carton.
2.Install Rear Stabilizer onto half circular of Frame Base Plate with 2pcs of 3/8”x2” Round Head Socket Screw.
■CONSOLE SUPPORT ASSEMBLY
1.Remove the Console Mast Cover then install it into Console Support Tube. Secure the Computer cable to the Twist Tie that is inside Console Support Tube then pull it through the Console Support Tube.
2.Install the Console Support Tube onto Receiving Tube of Main Frame and secure it with 6pcs of 5/16”x1/2” Button Head Socket Screw.
3.Install the Console Mast Cover into Main Frame.
*Please avoid cutting the wires.
■CONSOLE ASSEMBLY
1.Plug the Computer Cable Tube and Hand Pulse Cable into back of Console.
2.Install the Console onto Console Plate with 4pcs of M5x15m/m Button Head Socket
5 | ZE50 |
|