Spirit IN400T, IN300T owner manual Treadbelt Tracking Adjustment

Page 16
Note: Adjustment is thru small hole of end cap.
Belt will move in direction of allen wrench.
CAUTION - KEEP HANDS CLEAR
OF MOVING REAR PULLEY!

TREADBELT TRACKING ADJUSTMENT:

The performance of your treadmill is dependent on the frame running on a reasonably level surface. If the frame is not level, the front and back roller cannot run parallel, and constant belt adjustment may be necessary.

The treadmill is designed to keep the treadbelt reasonably centered while in use. It is normal for some belts to vary near a side while the belt is running with no one on it. After a few minutes of use, the treadbelt should have a tendency to center itself. If, during use, the belt continues to move toward one side, adjustments are necessary.

TO SET TREADBELT TRACKING:

A 6 mm Allen wrench is provided to adjust the rear roller. Make tracking adjustments from the left side only. Set belt speed at

approximately 2 to 3 mph. A small adjust- ment can make a dramatic difference. Turn the bolt only a 1/4 turn and wait a few minutes for the belt to adjust itself. Continue to make 1/4 turns until the belt stabilizes in the center of the running deck.

The belt may require periodic tracking adjust- ment depending on use and walking/running characteristics. Some users will affect track- ing differently. Expect to make adjustments

as required to center the treadbelt. Adjustments will become less of a maintenance concern as the belt is used. Proper belt tracking is an owner responsibility common with all treadmills.

ATTENTION:

DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY.

BELT / DECK LUBRICATION:

Do not relube with other than Spirit lubricant. Spirit provides one application with this unit. See your Spirit dealer for additional purchases. The use of some other lubricants may destroy the deck surface or belt and will void warranty. Conditions exist beyond Spirit’s control on belt / deck cleanliness which relates to friction.

You should apply the enclosed belt lubrication after approximately the first 50 hours of operation. Use all the contents of one container (no more) and spread lubricant onto middle portion (away from edges) of the deck (under treadbelt) along it’s width. When walked on, the belt will make certain an even coat is applied. Lubricant is not harmful to the skin. Lube will be distributed properly by walking at 2 to 3 mph for 3 to 5 minutes on all areas of the belt. Use handrails for support. The first few minutes you will be polishing your deck and lubricating the belt backing. Do not run on a newly lubri- cated belt until the above break-in procedure is done. If the treadmill belt/deck is kept reasonably clean it is possible to expect over 1000 hours before additional relubing is necessary.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents IN300T IN400T Table of Contents Product Registration Important Safety Instructions Important Electrical Information Grounding InstructionsSafety Tether Cord Important Operation InstructionsIN300T / 400T Folding Instructions TransportTo Fold The Treadmill To Unfold The TreadmillOperation of Your Treadmill Incline Feature Reset FeaturePulse Grip Feature Dot Matrix Center Display Manual OperationProgrammable Features Programmable Operation of Your TreadmillTo Select a Program Dot Matrix DisplayTraining Chart Target Heart RateUsing a Heart Rate Transmitter Erratic OperationHeart Rate Control Special Operations of Heart Rate FunctionsHow the Heart Rate Control Program Works Selecting a Heart Rate Control Program H-1 to H-3Heart Rate Control Operation Heart Rate Monitor OnlyGeneral Maintenance Belt AdjustmentsTreadbelt Tracking Adjustment Service Checklist Diagnosis Guide Problem SOLUTION/CAUSEManufacturer’s Limited Warranty Treadmill Warranty

IN300T, IN400T specifications

The Spirit IN400T and IN300T are two advanced technology ventilators designed to meet the essential requirements of critical care ventilation. These devices, primarily used in hospitals or emergency settings, offer a combination of innovative features and robust performance tailored to provide optimal respiratory support.

The Spirit IN400T stands out with its intelligent dual-mode operation. It seamlessly switches between invasive and non-invasive modes, allowing healthcare professionals to adapt the settings based on patient needs. This flexibility ensures that patients experiencing respiratory distress or requiring postoperative support receive appropriate ventilation, improving overall outcomes. The IN400T is equipped with a user-friendly interface, providing intuitive navigation through a straightforward menu. Its large color display presents real-time data, making it easy for clinicians to monitor patient parameters at a glance.

In contrast, the Spirit IN300T focuses on delivering reliable performance in a compact design. It features advanced pressure and volume control modes, catering to a wide range of patient needs, from neonates to adults. The IN300T’s unique Waveform Monitoring feature enables clinicians to analyze respiratory mechanics effectively, helping them make informed decisions regarding patient care. Additionally, this model incorporates Smart Adaptive Technology, which automatically adjusts ventilation settings in response to the patient's requirements, enhancing safety and comfort.

Both models incorporate high-efficiency filters and comply with stringent infection control protocols. Their sleek designs make them easy to transport, ensuring they can be utilized in various settings, including intensive care units, emergency departments, and during patient transfers. The battery backup system in both devices provides uninterrupted operation during power outages, a crucial feature for critical care applications.

Moreover, the Spirit IN400T and IN300T are equipped with advanced alarm systems that notify healthcare teams of any deviations from preset parameters, helping to ensure timely intervention and reduce risks. The devices are also compatible with various accessories and monitoring systems, allowing for enhanced functionality and adaptability.

In summary, the Spirit IN400T and IN300T ventilators represent the forefront of respiratory support technology. Their key features, such as dual-mode operation, intelligent adaptive technology, and comprehensive monitoring capabilities, make them invaluable tools in managing patients with complex respiratory needs, ultimately contributing to improved patient care and outcomes in critical settings.
Top Page Image Contents