Spirit IN300T, IN400T owner manual Important Electrical Information, Grounding Instructions

Page 5

Important Electrical Information

WARNING!

●NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the eleva- tion mechanism and transport wheels.

●NEVER remove any cover without first disconnecting AC power.

●If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect your voltage is low, contact your local power company or a licensed electrician for testing. See Diagnosis Guide, page 15.

●NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment.

●A red lighted power switch is located on the front base near the power cord. It is not necessary to trun this switch off except when service issues arise.

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in sketch A. A temporary adapter that looks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Grounded Outlet

Adapter

 

 

 

 

 

 

Metal Screw

 

Tab for

 

 

 

Grounding

Grounding Pin

Grounded Outlet Box

 

Screw

 

 

 

A

B

C

IN300T

 

3

 

 

 

IN400T

Page 4 Page 6
Image 5
Page 4 Page 6
Contents IN300T IN400T Table of Contents Product Registration Important Safety Instructions Grounding Instructions Important Electrical InformationImportant Operation Instructions Safety Tether CordTransport IN300T / 400T Folding InstructionsTo Fold The Treadmill To Unfold The TreadmillOperation of Your Treadmill Reset Feature Incline FeaturePulse Grip Feature Dot Matrix Center Display Manual OperationProgrammable Operation of Your Treadmill Programmable FeaturesTo Select a Program Dot Matrix DisplayTarget Heart Rate Training ChartErratic Operation Using a Heart Rate TransmitterSpecial Operations of Heart Rate Functions Heart Rate ControlHow the Heart Rate Control Program Works Selecting a Heart Rate Control Program H-1 to H-3Heart Rate Monitor Only Heart Rate Control OperationBelt Adjustments General MaintenanceTreadbelt Tracking Adjustment Problem SOLUTION/CAUSE Service Checklist Diagnosis GuideTreadmill Warranty Manufacturer’s Limited Warranty

IN300T, IN400T specifications

The Spirit IN400T and IN300T are two advanced technology ventilators designed to meet the essential requirements of critical care ventilation. These devices, primarily used in hospitals or emergency settings, offer a combination of innovative features and robust performance tailored to provide optimal respiratory support.

The Spirit IN400T stands out with its intelligent dual-mode operation. It seamlessly switches between invasive and non-invasive modes, allowing healthcare professionals to adapt the settings based on patient needs. This flexibility ensures that patients experiencing respiratory distress or requiring postoperative support receive appropriate ventilation, improving overall outcomes. The IN400T is equipped with a user-friendly interface, providing intuitive navigation through a straightforward menu. Its large color display presents real-time data, making it easy for clinicians to monitor patient parameters at a glance.

In contrast, the Spirit IN300T focuses on delivering reliable performance in a compact design. It features advanced pressure and volume control modes, catering to a wide range of patient needs, from neonates to adults. The IN300T’s unique Waveform Monitoring feature enables clinicians to analyze respiratory mechanics effectively, helping them make informed decisions regarding patient care. Additionally, this model incorporates Smart Adaptive Technology, which automatically adjusts ventilation settings in response to the patient's requirements, enhancing safety and comfort.

Both models incorporate high-efficiency filters and comply with stringent infection control protocols. Their sleek designs make them easy to transport, ensuring they can be utilized in various settings, including intensive care units, emergency departments, and during patient transfers. The battery backup system in both devices provides uninterrupted operation during power outages, a crucial feature for critical care applications.

Moreover, the Spirit IN400T and IN300T are equipped with advanced alarm systems that notify healthcare teams of any deviations from preset parameters, helping to ensure timely intervention and reduce risks. The devices are also compatible with various accessories and monitoring systems, allowing for enhanced functionality and adaptability.

In summary, the Spirit IN400T and IN300T ventilators represent the forefront of respiratory support technology. Their key features, such as dual-mode operation, intelligent adaptive technology, and comprehensive monitoring capabilities, make them invaluable tools in managing patients with complex respiratory needs, ultimately contributing to improved patient care and outcomes in critical settings.
Top Page Image Contents