20
FX40HR MOTORIZED TREADMILL
STABILIZER ADJUSTMENT
How to level the treadmill:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline adjustment to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer is adjusted correctly prior to use. You may need the assistance of another person to perform this adjustment.
1.To perform the stabilizer adjustment you first need to bring the treadmill to the highest incline level as shown in drawing 1. After you’ve completed the assembly procedure plug in the power cord and switch on the POWER SWITCH. Insert the Safety Key and press the START button to quick start the treadmill. Press the INCLINE UP button until the deck reaches its highest incline level. Now press the STOP button and pull out the Safety Key. Switch off the POWER SWITCH and unplug the power cord.
2.Inspect the two stabilizers (one per side) located underneath the base frame. The treadmill should sit on the floor with both stabilizers and all four cushions resting firmly on the floor as shown in drawing 2. Shake the handlebars back and forth to check if they are resting firmly on the floor. If they are not, pull the handlebar backward to adjust the stabilizers as shown in drawing 3. Simply turn the stabilizers like a screw to adjust their heights. Repeat this until the treadmill sits firmly on the floor.
1.Raise deck to highest incline level.
2.Check position of stabilizers and cushions.
3.Tilt treadmill to access stabilizers.
Visit us at: www.evofitness.com