Evo Fitness FX40HR user manual Cleaning, Deck Lubrication

Page 35

www.evofitness.com 35

MAINTENANCE

CLEANING:

Routine cleaning of your treadmill will extend the product's life.

•Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance.

•Important: DO NOT use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

•After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess perspiration.

•Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.

DECK LUBRICATION:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the running deck be checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually within the first 400 hours of use.

Every 2 months of operation lift the sides of the walking belt and feel the top surface of the running deck as far as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.

. To purchase lubricant Kit please contact Smooth Fitness 1-888-800-1167 To apply lubricant under the walking belt:

1.Position the walking belt so that the seam is located on top and in center of the walking board.

2.Insert the spray nozzle into the spray head of the lubricant can.

3.While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 6" from the front of the treadmill and as far to the center as possible. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 1/4 bottle (supplied with treadmill) each time.

Allow the silicone to "set" for 1 minute before using the treadmill.

Spray lubricant from front to back.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents
FX40HR Motorized Treadmill Precautions PrecautionsFor future service or related questions Power Requirements Power Requirementsƒ Gather your tools ƒ User Weight Limitationƒ Care and maintenance Before You Begin ƒ Open the boxesDescription Qty Supplied ComponentsMillimeters Supplied HardwareComplete Computer Console Complete Parts ListComplete Base Frame Components Parts ListComplete Running Deck Components 10 FX40HR Treadmill Parts List Most of the Parts Shown Here have Already Been PRE-ASSEMBLED Parts Diagram805 801 207 208 209 204 804 205 206 201 203 202 FX40HR Treadmill Parts Diagram 16 FX40HR Treadmill 602 603 601 832 809 604 605 822 818 703 702 704 840 814 707 706 Unpacking and Inventory Assembly306 Assemble The Side Handlebars 804 805805 204 301 Assemble Front Handlebar807 Attach the Right Upright Cover 304 to the right upright Attaching the Upright CoversAttach the Computer Connect Computer Cables 806 807807 Attach the Outside Upright CoversSecuring of the Upright Tubes Follow These Instructions to Level Your Treadmill Stabilizer AdjustmentFeatures Folding Instructions How to fold up the treadmillUnfolding Instructions How to unfold the treadmillTransport Instructions Transport InstructionsMotion Control Motion Control OperationBelt Adjustment MaintenanceHOW to Maintain the EVO FX40HR Treadmill Deck Lubrication CleaningBefore beginning Important StepsAerobic exercise Target Heart RateFinding your pulse Muscle Groups Muscle ChartTargeted muscle groups Stretching Routine Symptom Resolution Troubleshooting888.800.1167
Related manuals
Manual 32 pages 46.93 Kb Manual 41 pages 32.57 Kb