40 FX40HR TREADMILL
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer. Treadmill will not start:
Symptom | Resolution |
Treadmill will not power up
Check the following:
Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual).
Equipment circuit breaker is in the reset position
Equipment power switch is in the on position
Safety key is properly inserted into the computer console
Wall outlet is properly functioning with correct voltage (Have an electrician check for inadequate voltage at the outlet refer to the Power Requirements section in this manual)
House circuit breaker is reset and is the proper size. (refer to the Power Requirements section in this manual)
|
| Safety key is properly inserted into the |
|
|
|
| computer console |
|
|
|
| Equipment circuit breaker is in the reset |
|
|
|
| position |
|
|
| Treadmill stops operation during use | House circuit breaker is reset, meets proper |
|
|
| requirements and if worn replaced by an |
|
| |
|
| electrician. (refer to the Power Requirements |
|
|
|
| section in this manual) |
|
|
|
| Program time has expired |
|
|
| Treadmill will not incline(Power fold models only) | Check for proper positioning of spring knob for |
|
|
|
| folding(See procedure in owners manual) |
|
|
|
| Power Fold only |
|
|
|
| Check for proper positioning of spring knob |
|
|
| Treadmill will not unfold | for folding(See procedure in owners manual) |
|
|
| Manual Fold only |
|
| |
|
| Folding locking lever is depressed |
|
|
| Treadmill running belt moves slower than speed | Metric/English conversion (See owners manual |
|
|
| displayed on computer | for Metric/English conversion process) |
|
|
| Treadmill running belt moves slower than speed | Metric/English conversion (See owners manual |
|
|
| displayed on computer | for Metric/English conversion process) |
|
|
| Running belt is not centered | Treadmill is properly leveled(See procedure |
|
|
| in owners manual) |
|
| |
|
| Center running belt (See Centering |
|
|
|
| procedure in owners manual) |
|
|
| Running belt is slipping or hesitating while in use | Tension running belt (See process in owners |
|
|
|
| manual) |
|
|
| Treadmill running belt moves slower than speed | Metric/English conversion (See owners manual |
|
|
| displayed on computer | for Metric/English conversion process) |
|
|
|
|
|
|
|
| Running belt is not centered | Treadmill is properly leveled(See procedure |
|
|
| in owners manual) |
|
| |
|
| Center running belt (See Centering |
|
|
|
| procedure in owners manual) |
|
|
| Running belt is slipping or hesitating while in use | Tension running belt (See process in owners |
|
|
|
| manual) |
|
|