Evo Fitness EVO2 Troubleshooting, Treadmill will not start, Treadmill looses power during use

Page 27
TROUBLESHOOTING

27

EVO2 MOTORIZED TREADMILL

TROUBLESHOOTING

Troubleshooting

NOTE: Do not touch any internal electric wires without consulting the manufacturer.

Treadmill will not start:

1.Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual).

2.Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press the rest switch.

3.Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped, reset or have an electrician replace the breaker in home.

4.Have an electrician check for inadequate voltage at the outlet.

Treadmill looses power during use:

1.Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press the rest switch.

If the treadmill still will not operate, please call Technical service at 1.888.800.1167.

2.Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped, reset or have an electrician replace the breaker in home.

Treadmill walking belt slows during use:

1.Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a 14-guage cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will not operate, please call Technical service at 1.888.800.1167.

Treadmill walking belt slips or is not centered on rear roller:

Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical service at 1.888.800.1167.

Visit us at: www.evofitness.com

Page 26 Page 28
Image 27
Page 26 Page 28
Contents EVO2 MOTORIZED TREADMILL USER’S MANUALPRECAUTIONS For future service or related questionsPrecautions Power Requirements POWER REQUIREMENTSGather your tools PREASSEMBLYUser Weight Limitation Open the boxesHARDWARE COMPARISON CHART Hardware chartMILLIMETERS PARTS LIST DescriptionOrder No Description PARTS DIAGRAM EVO2 MOTORIZED TREADMILL STEP ASSEMBLYFIG-2 Attach the Cross Brace 25 to the Left and Right Uprights 26 and 27 using two M8 x 80mm Allen Head Bolts 21 and Metal Caps 22. Do not fully tighten the M8 x 80mm Allen Head Bolts 21. Insert the Console Tray 29 into the back of the Computer 1 and secure using one M5 x 12mm Screw 28. Do not fully tighten the M5 x 12mm Screw 28. Attach the Console Support Tube 30 to the Cross Brace 25 using one M8 x 25mm Screw 24. Insert the Console Support Tube 30 into the bottom of the Console Tray 29. Now fully tighten the M5 x 12mm Screw 28 and M8 x 80mm Allen Head Bolts CONNECT WIRESEVO2 MOTORIZED TREADMILL Attach the Left # 1 Handlebar Rear End Cap 7 and Left # 2 Handlebar Rear End Cap 8 to the Left Upright 26 using two Plastic Fixing Inserts 12 and four #8 x 12mm Screws EVO2 MOTORIZED TREADMILL 108 107 108 107 107107 108 TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONSMAINTENANCE HOW TO MAINTAIN THE EVO2 TREADMILLBELT ADJUSTMENT Spray lubricant from front to back CLEANINGDECK LUBRICATION To apply lubricant to the walking beltFrame WARRANTYWARRANTY - EVO by Smooth Fitness Treadmills Warranty Model NameBefore beginning IMPORTANT STEPSFinding your pulse TARGET HEART RATEFIND YOUR TARGET HEART RATE 200 180 160 140 120 100 20 25 30 35 40 45 50 55 60 65 AGE IN YEARSTargeted muscle groups MUSCLE CHARTShoulder Lift STRETCHING ROUTINEWarm up and cool down Toe TouchCalf-Achilles Stretch Hamstring StretchInner Thigh Stretch Side StretchTreadmill will not start TROUBLESHOOTINGTroubleshooting Treadmill looses power during useWebsite Toll Free Customer Service1.888.800.1167 Smooth Fitness 112 Gaither Drive Mt. Laurel, NJ
Top Page Image Contents