Evo Fitness EVO 1CD Cleaning, Deck Lubrication, To apply lubricant to the walking belt

Page 31

MAINTENANCE INSTRUCTIONS

WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector.

CLEANING:

Routine cleaning of your treadmill will extend the product's life. Warning! To prevent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before attempting any

DECK LUBRICATION:

The walking belt has been pre- lubricated at the factory. However, it is recommended that the walking board be checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually within the first year or 500 hours of use. Call your local Smooth dealer for service or questions regarding EVO products.

3.While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.

4.Allow the silicone to "set" for 1 minute before using the treadmill.

maintenance

cleaning or maintenance.

After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess perspiration.

IMPORTANT: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.

Every 30 days or 30 hours of operation, lift the sides of the walking belt and feel the top surface of the walking board as far as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.

Please use Lube 'N Walk (can be purchased from your dealer or call the number on the front of the manual), or a non-petroleum based silicone such as "Napa 8300" (available at most stores).

To apply lubricant to the walking belt:

1.Position the walking belt so that the seam is located on top and in center of the walking board.

2.Insert the spray nozzle into the spray head of the lubricant can.

SPRAY FROM

FRONT TO BACK

-31-

Page 30 Page 32
Image 31
Page 30 Page 32
Contents EVO 1CD Motorized Treadmill Before Beginning PrecautionsFor future service or related questions PrecautionsPower Requirements Power requirementsPower Requirements Preassembly Piece Comparison ChartStep AssemblyInstructions FIG-1Assembly instructions FIG-2 AssemblyCD Player Wires Instructions Assembly instructions Assembly instructions Assembly instructions Connect the sensor wires Assembly instructions Assembly instructions Speaker Console Knob Optional Equipment AssemblyConnecting the Speakers and CD Player FIG-3Fold UP for Storage Folding instructionsRoll away instructions How to roll away the EVO 1CD TreadmillRoll Away for Storage Unfold for USE Unfolding instructionsEnglish / Metric Conversion Power onSleep Mode Console OperationGoal Course Time Computer instructionsCool Down Quick StartMinute Fast RUN Goal Course CaloriesMinute Walk Minute JOGWorkout Time SET UP User AGE SET UPHeart Rate Control Activate Heart Rate Control Motion Control Instruction Page Access the stabilizers Stabilizer adjustmentStabilizer Adjustment Stabilizer adjustment instructionTension bolts for belt adjustment MaintenanceHow to Maintain the EVO 1CD Treadmill Belt AdjustmentDeck Lubrication CleaningTo apply lubricant to the walking belt Warranty WarrantyBefore beginning Important stepsYour Target Zone Target heart rateExercising Muscle Chart Muscle chartUP and Cool Down Stretching routineWarm Shoulder Lift Number Description Quantity Parts listPlace Majority of the Listed Hardware is AlreadyParts diagram EVO1CD-99 Description QuantityMany Parts Shown have Been PRE-ASSEMBLED by the Factory Majority of the Listed Hardware is Already in Place Parts diagram
Top Page Image Contents