Epic Fitness ECTL09706.1 manual HOW to Connect AN Antenna, HOW to Connect a 75 OHM Catv Cable

Page 12

Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included.

HOW TO CONNECT AN ANTENNA

300 Ohm Flat Wire

Indoor Antenna

1.Place a VHF antenna in the desired loca- tion. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

Screwdriver

VHF 300

Ohm Flat

Wire

300 to 75 Ohm Adapter

1.See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

1.See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord.

2. Push the 300

ohm to 75 ohm

VHF

HOW TO CONNECT A 75 OHM CATV CABLE

adapter onto

the 75 ohm an-

tenna terminal

on the treadmill

frame near the

power cord.

Antenna

300 to 75 Ohm

Adapter

75Ohm Terminal

1.Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

75 Ohm Terminal

Outdoor Antenna

HOW TO CONNECT A VCR

1. Connect one end of a 75 ohm CATV cable to the

video output jack on your VCR.

Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna.

Combination

 

VHF/UHF Antennas

 

300 Ohm

 

Flat Wire

 

75 Ohm

75 Ohm

Terminal

CATV Cable

300 to 75

 

Ohm Adapter

 

75 Ohm CATV Cable

2.

Plug in the power cord of your VCR. See your VCR

 

user’s manual for proper grounding instructions.

3.

Connect the 75 ohm CATV cable to the 75 ohm an-

 

tenna terminal on the treadmill frame near the power

 

cord.

HOW TO CONNECT A DVD PLAYER OR VCR

Plug the three-pronged end of the included audio/video wire harness into your DVD player or VCR, and plug the other end into the audio/video input jack on the treadmill frame near the power cord.

HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE

Locate the audio/video jack below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal video player.

12

Image 12
Contents QUESTIONS? Model No. ECTL09706.1 Serial NoTable of Contents Important Precautions Page Power Lines Before YOU Begin Assembly Page Make sure that no wires are pinched Page Page HOW to Connect AN Antenna HOW to Connect a 75 OHM Catv CableHOW to Connect a VCR HOW to Connect a DVD Player or VCROperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Select the manual modeStart the walking belt and adjust the speed Change the incline of the treadmill as desiredMeasure your heart rate if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select a preset programPress the Start button to start the program HOW to Operate the Personal Television Press the Volume buttons to adjust the volumeHOW to USE the Stereo Sound System Press the Channel buttons to select Desired channelHOW to USE the Information Mode ChannelsOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0107A Qty DescriptionQty Description Exploded DRAWING-Model No. ECTL09706.1 No. ECTL09706.1 Ordering Replacement Parts Limited WarrantyIcon of CANADA, INC., 900 DE L’INDUSTRIE Quebec J7Y 4B8