Epic Fitness ECTL09706.1 manual HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 21

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. To raise the frame, bend your legs, keep your back straight, and lift with your legs. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

Frame

Frame

Latch Knob

Handrails

Wheel

1.Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the frame downward and release the latch knob. Note: To release the latch knob, it may be necessary to push the frame forward as you pull the latch knob to the left.

2.Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor. Make sure to bend your legs and keep your back straight.

21

Image 21
Contents Model No. ECTL09706.1 Serial No QUESTIONS?Table of Contents Important Precautions Page Power Lines Before YOU Begin Assembly Page Make sure that no wires are pinched Page Page HOW to Connect a 75 OHM Catv Cable HOW to Connect AN AntennaHOW to Connect a VCR HOW to Connect a DVD Player or VCROperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramSelect the manual mode HOW to Turn on the Power HOW to USE the Manual ModeStart the walking belt and adjust the speed Change the incline of the treadmill as desiredMeasure your heart rate if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select a preset programPress the Start button to start the program Press the Volume buttons to adjust the volume HOW to Operate the Personal TelevisionHOW to USE the Stereo Sound System Press the Channel buttons to select Desired channelChannels HOW to USE the Information ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onPage Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description R0107AQty Description Exploded DRAWING-Model No. ECTL09706.1 No. ECTL09706.1 Ordering Replacement Parts Limited WarrantyIcon of CANADA, INC., 900 DE L’INDUSTRIE Quebec J7Y 4B8