Gold's Gym GGTL03607.5 Upright Spacer 80. Be careful not to pinch, Not fully fold the Frame yet

4. Hold a Bolt Spacer (79) inside the lower end of

4

the Right Upright (78). Insert an M10 x 96mm

5

Bolt (5) with an M10 Star Washer (8) into the

78

Right Upright and the Bolt Spacer. Repeat this

step with a second Bolt Spacer (79), M10 x

96mm Bolt (5), and M10 Star Washer (8).

8

77

79

Hold the Right Upright (78) against the Right

Upright Spacer (80). Be careful not to pinch

the Upright Wire (77). Partially tighten the M10

79

82

x 96mm Bolts (5); do not fully tighten the

80

Bolts yet.

Press a Base Cap (82) into the Base (85).

85

5. With the help of a second person, carefully tip

5

the treadmill onto its right side. Partially fold the

Frame (48) so the treadmill is more stable; do

not fully fold the Frame yet.

2 81

48

Attach a Base Pad (81) to the Base (85) in the

location shown with an M4.2 x 25mm Tek Screw

27

(2) and a Base Pad Spacer (64). Then, attach

another Base Pad (81) with only an M4.2 x

85

64

25mm Tek Screw (2).

Attach a Wheel (86) to the Base (85) with an

86

M10 x 50mm Bolt (27) and an M10 Nut (33). Do

2

81

33

not overtighten the Nut; the Wheel must turn

freely.

6. Have a second person hold a Bolt Spacer (79)

6

inside the lower end of the Left Upright (73).

Insert an M10 x 96mm Bolt (5) with an M10 Star

73

Washer (8) into the Left Upright and the Bolt

5

83

Spacer. Repeat this step with a second Bolt

Spacer (79), M10 x 96mm Bolt (5), and M10

79

8

Star Washer (8).

Orient the Left Upright (73) and the Left Upright

Spacer (83) as shown. Hold the Left Upright

82

79

Spacer and the Left Upright against the Base

(85). Partially tighten the M10 x 96mm Bolts (5);

85

do not fully tighten the Bolts yet.

Press a Base Cap (82) into the Base (85).

With the help of a second person, tip the tread-

mill so that the Base (85) is flat on the floor.

8