To stop the program temporarily, press one of the Stop buttons. All displays will pause and the Time/ Segment Time display will begin to flash. To restart the program, press the Start button or the Speed ▲ button. To end the program, press a Stop button, remove the key, and then reinsert the key.
4Use the hand weights, if desired.
If the Fitnesswalk, Cardiojog, or Cardiorun program is selected, the Cross Training Indicator in the Time/ Segment Time display will periodically flash.
While the indicator is flashing, use the included hand weights for upper body exercise as you walk on the treadmill.
5Follow your progress with the displays.
Refer to step 5 on page 11.
6Use the handgrip pulse sensor, if desired.
Refer to step 6 on page 11.
7When the program has ended, remove the key.
Step onto the foot rails and make sure that the in- cline of the treadmill is at 0%. The incline must be at 0% when the treadmill is raised to the storage position. Next, remove the key from the console and put it in a secure place. Note: If the displays and indicators on the console remain lit after the key is removed, the console is in the ÒdemoÓ mode. Refer to page 22 and turn off the demo mode.
When you are finished using the treadmill, move the on/off switch near the power cord to the off position and unplug the power cord.
HOW TO USE THE PULSE PROGRAMS
1Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
2Put on the chest pulse sensor.
You must wear the chest pulse sensor to use a pulse program. Follow the instructions on page 6 to put on the chest pulse sensor.
3Select one of the two pulse programs.
When the key is
inserted, the manual mode will
be selected and
the manual indi- cator will light. To select one of the
pulse programs, press the Select Workout button repeatedly until one of the two pulse program indi- cators lights.
The profiles on the console show how the target heart rate will change during the programs. The program display will
show a simplified profile
of the program. The Time/Segment Time dis- play will show how long the selected program
will last.
4Enter your age.
When a pulse program is se- lected, an age
setting will begin to flash in the
Pulse display. If you have already
entered your age, simply press the Enter button. To enter your age, press the ▲ and ▼ buttons; the buttons can be held down to enter your age quickly. When your age is shown, press the Enter button.
13