Healthrider HRTL16991 manual TROUBLE-SHOOTING and Maintenance, Problemsolution

Page 25

TROUBLE-SHOOTING AND MAINTENANCE

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEMSOLUTION

1.The power does not turn on

a.Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b.Make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d.Check the on/off switch located on the frame near the power cord. The switch must be in the on posi- tion.

Tripped Reset

On

Position

2.The power turns off during use

a.Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in.

c.Remove the key from the console and then reinsert it.

d.Make sure that the on/off switch is in the on position (see 1. d. above).

3. The walking belt

a. Make sure that only an appropriate surge protector is used (see 1. a. above).

slows when walked

 

 

on

b. If the walking belt is overtightened, tread-

b

 

mill performance may decrease and the

 

 

 

walking belt may be permanently dam-

3Ð4Ó

 

aged. Remove the key and UNPLUG THE

 

 

POWER CORD. Using the included allen

 

 

wrench, turn both rear roller adjustment

 

 

bolts counterclockwise 1/4 of a turn. When

 

 

the walking belt is properly tightened, you

 

 

should be able to lift the edges of the

Rear Roller Adjustment Bolts

 

walking belt 3 to 4 inches off the walking

 

 

platform. Be careful to keep the walking

 

 

belt centered. Plug in the power cord, insert the key and run the treadmill for a few

 

minutes. Repeat until the walking belt is properly tightened.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents
Model No. HRTL16991 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsPage Right Side Before YOU BeginBack Assembly HOW to PUT on the Chest Pulse Sensor HOW to USE the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TROUBLE-SHOOTINGHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Diagram of the Console Features of the Console Description of the Console HOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Adjust the incline of the treadmill as desiredDistance/Incline Follow your progress With the LED track Five displaysUse the handgrip pulse sensor, if desired Walking belt and remove the keySelect one of the six preset programs HOW to USE the Preset ProgramsTo start the program HOW to USE the Pulse Programs Enter a maximum heart rate setting Desired speed and incline settings HOW to Create Custom ProgramsSelect one of the two custom programs To start the walking beltHOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoPressVCR. the Play button on your CD player or HOW to Connect Your VCRWhenkey. the program is completed, remove Go to your computer and start an internet HOW to USE Programs Directly from OUR Internet Site Connection Start your web browser, if necessary ProgramImportant The Calories display should be blank. If Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problemsolution TROUBLE-SHOOTING and MaintenanceDisplays Magnet and the Reed Switch is aboutTop Make sure that the gap between Bubbles form in the walking beltChest pulse sen- sor does not function properly Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Key Qty Description Part LISTÑModel No. HRTL16991HOW to Order Replacement Parts Exploded DRAWINGÑModel No HRTL16991 Limited Warranty
Top Page Image Contents