JVC SR-V10U 12 EN, Setting clock manually, #.Set time, Manual Clock Set

12 EN INITIAL SETTINGS (cont.)

1 2 3

2

4 5 6

7 8 9

0 4

1

8	4–7
	4–7

5Press SHUTTLE PLUS %Þ until the desired date appears, then press OK or SHUTTLE PLUS #.

●Holding SHUTTLE PLUS %Þ changes the date in 15-day intervals.Set date

6Press SHUTTLE PLUS %Þ until the desired year appears, then press OK or SHUTTLE PLUS #twice.Set year

7Select D.S.T. mode

You can select either “ON” or “OFF”.

ON– Adjustment will be made by the built-in clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

Press SHUTTLE PLUS %Þ to select the desired setting.

8StartPress MENUclock and normal screen appears.

To make corrections any time during the process

Press OK or SHUTTLE PLUS # repeatedly until the item you want to change blinks, then press SHUTTLE PLUS %Þ.

Setting clock manually

— Manual Clock Set

First follow steps 1 to 3 on page 10, then go to the following steps.

4Press SHUTTLE PLUS

%Þ until the desired time appears, then press

OK or SHUTTLE PLUS

#.Set time

CLOCK SET

TIME	DATE	YEAR
– –:– –AM	1/ 1	02

AUTO CLOCK : ON

HOST CH : AUTO (CATV)

D.S.T. : AUTO

TIME ZONE : AUTO PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

●Holding SHUTTLE PLUS %Þ changes the time in 30-minute intervals.

●When the time is entered manually, “AUTO CLOCK” is automatically set to “OFF”, and “HOST CH” and “TIME ZONE” disappear.