JVC SR-V10U Basic Playback Features, 16 EN, Changing display information, Checking tape position

16 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Playback

Features

	REW	FF
	PLAY
POWER	–	+

CH– /+

PUSH / TURN

	REC LINK			A.DUB
S VIDEO	VIDEO (MONO)L—AUDIO—R				24HR QUICK
					PROGRAM
	DIGITAL TBC/NR	SP	EP	INSERT
			VCR		REC	PAUSE STOP/EJECT

		STOP/EJECT
		( 7 / 0 )
		F –b
E		A
	2	3
1
		2
4	5	6
7	8	9
C. RESET	0	F –C

D –2

1	D –1
F –a, b, c	C

F –aSTOP ( 7 )

G

A Changing display information

Press DISPLAY during playback.

Each time you press the button, the front display panel shows the time counter, tape remaining time and the clock time in sequence.

Time Counter		Tape Remaining Time
	Clock Time

●To display the VCR status including the tape remaining time, the time counter and the clock time on the TV screen, see “Showing on-screen display” (☞ pg. 21).

●The approximate tape remaining time appears and the "" indicator lights on the front display panel.

●The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate.

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

B Checking tape position

The tape position indicator appears on screen in the following cases:

●When you change the VCR

operation mode from the	B	+ +	+		E
stop mode to fast forward or
rewind mode.		COUNT		0:33:27
● When you perform an Index

Search (☞ pg. 17) or Instant Review (☞ pg. 18).

The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.

NOTES:

●"ON SCREEN (PLAY)" must be set to “ON”, or the indicator will not appear (☞ pg. 37, 39).

●It may take a few seconds for the tape position indicator to be displayed.

C Playing back tape repeatedly

— Repeat Play

You can play back a tape repeatedly.

While playing back a tape, press and hold PLAY ( 3 ) for more than 5 seconds.

The play indicator ( # ) on the front display panel starts flashing slowly, and a tape will be played back repeatedly.

To stop playback, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

●To select the returning point (recording end or tape end), see "RETURN POINT" on page 41.

To prohibit operations during Repeat Play (Mode Lock)

Press and hold OK on the Remote for more than 5 seconds. "" and "" light up on the front display panel (☞ pg. 60). The entire recording or entire tape will be played back repeatedly without any interruption.

To cancel Mode Lock, press and hold OK on the Remote again for more than 5 seconds.

●When OK is pressed to set Mode Lock, the on-screen display appears and the time counter remains on the TV screen. If the time counter is not necessary, set "ON SCREEN (PLAY)" to "OFF" ( ☞ pg. 37, 39).