JVC SR-V10U Normal and Hi-Fi tracks. The main audio is not recorded, Hi-Fi and normal tracks

40 EN		OTHER USEFUL FUNCTIONS (cont.)
		* The default setting is bold in the table below.
⬛ 2ND AUDIO RECORD		When this function is set to “ON”;
		● If a SAP program is received, the SAP audio is recorded on both the
ON
		normal and Hi-Fi tracks. The main audio is not recorded.
OFF
		● If a non-SAP program is received, the main audio is recorded on both
		the Hi-Fi and normal tracks.
		When this function is set to “OFF”, the SAP audio cannot be recorded.
⬛ AUDIO MONITOR		This VCR can record two sound tracks simultaneously (normal and Hi-
HI-FI:	Normally select this.	Fi) on a tape.
		You can select the sound track(s) to listen to while playing back a Hi-Fi
	Hi-Fi sound is played
		stereo tape.
	back.
		In addition, when playing back a prerecorded tape containing two
HI-FI L: Sound on the left Hi-Fi
		separate audio programs on the Hi-Fi tracks, you can choose either one
	channel is played back.
		by selecting either “HI-FI L” or “HI-FI R”.
HI-FI R: Sound on the right Hi-Fi
	channel is played back.	NOTES:
NORM: Sound on the normal track
	is played back.	● While playing back a monaural tape, sounds on the normal track will be heard
MIX:	Both sounds on the Hi-Fi	regardless of this setting.
		● If RF connection (☞ pg. 7) is used for viewing pictures on the TV, sound will be
	track and normal track are
		monaural even though you select “HI-FI”.
	mixed and played back.
		● You can also use the A. MONITOR button on the Remote to select the desired
		monitor sound. (☞ pg. 17)
⬛ S-VHS MODE		You can determine which recording mode — either S-VHS mode or VHS
ON		mode — is used for recording on S-VHS tapes.
OFF		When this function is set to “ON”, you can record on S-VHS tapes with
		S-VHS picture quality.
		When this function is set to “OFF”, you can record on S-VHS tapes with
		VHS picture quality.
		NOTES:
		• S-VHS mode allows you to make high quality video recordings with horizontal
		resolution of 400 lines, comparing with the 230 lines of resolution of
		conventional VHS recordings. To achieve the highest quality picture we
		recommended to record in S-VHS mode. (But remember that a conventional
		VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS
		mode.)
		• S-VHS MODE setting does not affect recording on VHS tapes. Recording on
		VHS tapes is always performed in VHS mode except when using S-VHS ET
		mode (☞ pg. 41).
⬛ FRONT AUX INPUT		You have to select which terminal — either VIDEO (composite) or S
VIDEO		VIDEO (Y/C separate signals) — to use as the video input terminal on the
		front panel.
S-VIDEO
		Make sure to select the correct terminal; otherwise, you may fail in
		recording (editing) on this VCR.
⬛ REAR AUX INPUT		You have to select which terminal — either VIDEO (composite) or S
VIDEO		VIDEO (Y/C separate signals) — to use as the video input terminal on the
		rear panel.
S-VIDEO
		Make sure to select the correct terminal; otherwise, you may fail in
		recording (editing) on this VCR.

Refer to page 37 for setting procedures.