JVC SR-V10U Adjusting tracking condition, Selecting monitor sound, Automatic operations after

Page 17

EN 17

D Adjusting tracking condition

— Tracking Adjustments Automatic tracking adjustment

This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.

You can also use the manual tracking during slow motion playback (pg. 27).

1 Activate manual tracking

Press SP/EP on the Remote during playback.

2 Eliminate the noises on the TV screen

Press CH + or on the Remote.

Press it briefly for a fine adjustment, or press and hold for coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.

To reactivate automatic tracking, press SP/EP on the Remote. The automatic tracking becomes active again.

E Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows:

 

 

HI-FI

 

 

 

HI-FI L

 

 

HI-FI R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORM

 

 

 

 

NORM

 

 

 

HI-FI

 

 

 

 

 

 

 

 

 

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R:Sound on the right Hi-Fi channel is played back. NORM:Sound on the normal track is played back.

NORM HI-FI:

Both sounds on the Hi-Fi track and normal track are mixed and played back.

NOTES:

The above indication appears when “ON SCREEN (PLAY)” is set to “ON” (pg. 37, 39), though the monitor sound changes in sequence.

If the tape being played back has no Hi-Fi sound track, the normal sound track will be heard regardless of this setting.

If RF connection (pg. 7) is used for viewing pictures on the TV, sound will be monaural even though you select “HI-FI”.

You can also use the menu to select your desired monitor sound. (pg. 40)

F Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2Ê seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2Ê seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2Ê seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

G Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function.

1 Start search

While the tape is not running, press SHUTTLE PLUS

4or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away, press SHUTTLE PLUS 4 or ¢ repeatedly until the correct number is displayed on screen (only if “ON SCREEN (REC)” is set to “ON” ; pg. 37, 39). Playback begins automatically when the desired recording is located.

Beginning of the current

 

 

 

 

Current position

Beginning of the 2nd next

program recorded

 

 

 

 

 

 

on the tape

 

 

program recorded

 

 

 

 

 

 

 

Previous

 

 

 

 

 

 

 

Next

 

 

 

program

 

 

 

 

 

 

 

program

2nd

next

recorded

 

 

 

 

 

 

 

recorded

 

 

 

–2

–1

 

 

1

2

 

3

 

 

 

4 ¢

If you want to find the very beginning of the desired program, press REW ( 1 ) or FF ( Á ) after playback starts.

NOTE:

An index code is not placed on the tape when recording is resumed from recording pause.

Image 17
Contents SR-V10U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Not supplied AC Power CordCoaxial cable Flat feeder Matching transformerInstalling/Removing the lithium battery Check contentsSituate VCR Connect VCR to TVClock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup Last-Function Memory What to do if Plug & Play setting failedDAY/TIME Insert pg , 41 g- REC Safety pg Preparations Clock Setting10 EN Setting clock semiautomatically 12 EN Setting clock manually#.Set time To make corrections any time during the processAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Automatically Auto Channel Set14 EN Access Manual Channel Set screenAdd or skip desired channels Manual Channel SetStart playback Basic PlaybackLoad a cassette 16 EN Basic Playback FeaturesChanging display information Checking tape positionSelecting monitor sound Adjusting tracking conditionAutomatic operations after Locating beginningAdjusting picture condition Locating beginning of timer18 EN Recordings Instant ReviewSelect recording channel Basic RecordingSet tape speed Start recording20 EN Basic Recording FeaturesTime Counter Channel NoShowing on-screen display Watching one program while recording anotherSR-V10U-1 SR-V10U-2 Series Playback22 EN Make connections To prohibit operations during Series Playback Mode LockTurn on all components Load cassettesSR-V10U-1 Series RecordingCamcorder Another VCR To S Video To Audio/Video Output Not suppliedTo prohibit operations during Series Recording Mode Lock Set recording VCRs input modePrepare for recording Press STOP/EJECT 7 / 0 on the SR-V10U which is recording26 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchViewing slow motion picture Viewing still pictureSkipping unwanted portions 28 EN VCR Plus+ Timer ProgramingAccess PlusCode No. screen To use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Check program dateVCR Plus+ guide channel matching Changing VCR Plus+ Setting30 EN Or Shuttle Plus %Þ Input guide channel number32 EN Express Timer ProgramingPress SP/EP to set the tape speed To timer-record daily Sunday-Saturday or weekly serialsTimer warning display Access 24HR quick program display24HR Quick Programing 34 ENChecking program settings Confirm overlapping programs 36 ENSelect program to modify Program Completed appears on the screen for aboutAccess Function Set screen Useful Function SettingsChange setting Select FunctionWhen this function is set to OFF When this function is set to onDisplay appears on the screen during playback Entire program while timer-recording in SP modeFor Example Another VCRNormal and Hi-Fi tracks. The main audio is not recorded Mode is used for recording on S-VHS tapesHi-Fi and normal tracks By selecting either HI-FI L or HI-FI RFront display panel when S-VHS ET is set to on Default setting is bold in the table belowEngage Satellite Auto Recording standby mode Set timer program on DBS receiverMake sure the record safety tab is intact 42 ENChild Lock 44 EN Edit From CamcorderConnection Various connection for editing tapesSelect video input terminal Select input mode on this VCRSelect edit mode 46 EN Edit To Or From AnotherSelect video input terminal on recording To S Video To AudioActivate editing mode Select input modeAudio Dubbing Locate start pointInsert Editing 48 ENSource tape Edited tape Another VCR for playbackStart editing Prepare tapesLocate end point To stop editing any time during recording50 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box52 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeSet remote control code for Remote Changing Remote Control CodeCheck remote control code for VCR To control two VCRs with the same Remote54 EN TroubleshootingTimer Recording 56 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms 58 EN@ # $ % Front panelFront display panel 60 ENOn-screen display Rear panelRemote How to use the Remote62 EN Usable cassettes SR-V10U
Related manuals
Manual 64 pages 47.33 Kb

SR-V10U specifications

The JVC SR-V10U is a professional digital video recorder that stands out in the realm of multimedia production due to its robust features and advanced technology. Designed for a variety of applications, including broadcasting, documentary production, and archiving, the SR-V10U offers impressive capabilities that cater to the needs of professionals in the field.

One of the key features of the JVC SR-V10U is its ability to record in both DV and VHS formats. This dual-format functionality allows users to transition seamlessly between digital and analog recording. With a high-quality digital video recording capability, users can expect sharp images and crisp audio, making it an excellent choice for video production where quality is paramount.

The SR-V10U utilizes a professional-grade digital signal processing system, ensuring exceptional image stability and clarity. Advanced image processing techniques enhance colors and reduce noise, contributing to a polished final product. Additionally, the device boasts a built-in time base corrector, which helps maintain video quality during playback and recording, further enhancing its reliability for professional use.

The device is equipped with versatile input and output options, including IEEE 1394 (FireWire) connectivity that enables easy digital transfers to computers or other digital editing systems. This ensures a smooth workflow for editors and producers who require fast and efficient data management.

In terms of usability, the JVC SR-V10U features an intuitive interface that simplifies the operation of the recording device. Users can easily navigate menus and settings, providing a user-friendly experience even in high-pressure production environments. The multifunctional LCD display offers clear visual feedback on settings and recording status.

Another notable characteristic of the SR-V10U is its extended recording capability. The device can record up to six hours on a single DV tape and up to two hours in VHS mode, making it practical for events or lengthy projects where changing tapes frequently is not feasible.

In conclusion, the JVC SR-V10U combines professional-grade recording features, versatile connectivity options, and user-friendly operation that make it a valuable asset for media professionals. Its dual-format recording, advanced image processing, and extended recording capacity solidify its place as a preferred choice for those looking to capture high-quality video content efficiently. Whether for field use or studio production, the SR-V10U continues to meet the evolving demands of the video production industry.