THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down either of the Stop buttons while inserting the key into the console. When the information mode is selected, the following information will be shown:
The Time/Segment Time display will show the total number of hours that the treadmill has been used.
The Distance/Incline display will show the total number of miles that the walking belt has moved.
An “E,” for English miles, or an “M,” for metric kilometers, will appear in the Speed dis- play. Press the Speed ▲ button to change the unit of measurement.
IMPORTANT: The Pulse/Calories display should be blank. If a “d” appears in the display, the console is in the “demo”
mode. This mode is in- tended to be used only
when a treadmill is displayed in a store. When the con- sole is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will au- tomatically light in a preset sequence, although the but- tons on the console will not operate. If a “d” appears in the Pulse/Calories display when the information mode is selected, press the Speed ▼ button so the
Pulse/Calories display is blank.
To exit the information mode, remove the key from the console.
THE OPTIONAL HANDGRIP PULSE SENSOR
An optional handgrip pulse sensor allows you to conveniently measure your heart rate before you begin
exercising, during your workout, and after you finish. To purchase the optional handgrip pulse sensor, call
Note: The console’s pulse programs require the use of the chest pulse sensor.
22