Reebok Fitness RBEX2976.3 manual Wire Harnesses during this step, Step

3.While another person holds the Handlebar Post (6) near the Frame (1), connect the Upper Wire Harness (55) to the Lower Wire Harness (51). Next, pull the excess Upper Wire Harness out of the top of the Handlebar Post, and slide the Handlebar Post onto the Frame. Tip: Avoid pinching the

Wire Harnesses during this step.

Attach the Handlebar Post (6) to the Frame (1) with three M10 x 50mm Button Screws (46) and three M10 Split Washers (63); tighten the two Button

Screws in the front of the Handlebar Post first, and then tighten the third Button Screw.

4.Attach the Water Bottle Holder (18) to the Handlebar Post (6) with two M4 x 19mm Screws (33).

5.Have a second person hold the Handlebar (7) near the Handlebar Post (6). Insert the Controller Wires

(54)into the hole in the Handlebar Post and pull them upward out of the top of the Handlebar Post.

Attach the Handlebar (7) to the Handlebar Post (6) with two Black M10 x 50mm Button Screws (64), two Black M10 Curved Washers (61), two M10 Curved Washers (36), and two M10 Nylon Locknuts (48). Tip: Avoid pinching the wires during this

step.

3
		6
	63
		63	46
46
	63	55
		51
		1
4
	6	18
			33
5	36
48
		55
36		Hole
6		54	7
			61
		61	64

7