Maintenance and TROUBLE-SHOOTING

Inspect and tighten all parts of the AEROBIC RIDER 2 regularly. The AEROBIC RIDER 2 can be cleaned with a soft, damp cloth; do not use solvents. To prevent damage to the monitor, keep liquid away from the monitor and keep the monitor out of direct sunlight. When storing the AEROBIC RIDER 2, remove the batteries from the monitor.

HOW TO REPLACE THE BATTERIES

If the display of the monitor becomes dim, the AA batteries should be replaced. Remove the battery cover from the monitor. Remove the old batteries. Insert two new batteries into the monitor. Identify the negative (–) and positive (+) ends of the batteries. The springs in the battery compartment should touch the negative ends of the batteries.

Re-attach the battery cover to the monitor.

HOW TO LUBRICATE THE AEROBIC RIDER 2

Every three months, a small amount of light multi-purpose oil should be applied to the AEROBIC RIDER 2. Apply a few drops of oil between the axle caps or Axle Fasteners and the frame in the locations shown at the right. Make sure to apply oil to both sides of the AEROBIC RIDER 2.

	Battery
	Cover
(+)	(–)
	AA
	Batteries
	Monitor
	Apply Oil