Daily Operations—Playback
In this manual, the operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
DISC 1– | 1 | |
DISC 5 | Number | |
RETURN | ||
buttons | ||
CANCEL | ||
| ||
TOP MENU/PG | MENU/PL | |
| , , , , | |
| ENTER/SET |
¥Turn on the power.
The STANDBY Led on the main unit goes off.
•Without pressing 
AUDIO, the System also turns on by pressing one of the source selecting buttons in the next step.
øSelect the source.
Playback automatically starts if the selected source is ready to start playback.
•To listen to the sound of the external component, press FM/AM/AUX repeatedly to select “AUX” as the source, then start playback on the external component.
πAdjust the volume.
To turn off (standby) the System
The STANDBY Led on the main unit lights in red.
FM/PLAY
MODE, 
GROUP/TITLE
PREV.,
,
NEXT, 
SHIFT
2
REVERSE MODE
,
FADE MUTING
3
• A small amount of power is always consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
•Disconnecting the headphones will activate the speakers again.
1
DO NOT turn off (standby) the System with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.
2
3
How to select a number
To select 5, press 5. To select 10, press 10.
To select 15, press 
10, 1, then 5. To select 30, press 
10, 3, then 0. To select 125, press 
10, 
10, 1, 2, then 5.
8