Playing Back a Disc/USB Mass Storage

4 Store the station.

To connect a USB mass storage class device

To tune in to a preset station

1Select the band (FM or AM).

TUNER FM TUNER AM

AUX

2Select the preset number for the station you stored.

•To select a number, see “How to select a number” on page 8.

• You can also use ¢/4 buttons.

Playing Back a Disc/USB Mass Storage

Class Device

INFO

•

IMPORTANT: Before playing a disc/USB mass

storage class device, make sure of the following...

•Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays.

•For disc/USB mass storage class device playback, you can change the initial setting to your preference. See “Setup Menu Operations” on page 37.

If “” appears on the TV screen when you press a

button, the disc/USB mass storage class device cannot perform the operation you have tried to do.

•For playback of AV files, see also “Operations Using the Control Screen” on page 27.

To insert discs

•When using an 8 cm disc, place it on the inner circle of the disc tray.

To close the disc tray, press the same 0 button again.

•If you press # for the same tray, the disc tray closes and playback starts automatically.

USB cable (not supplied)

•Always set the volume to the minimum level when connecting or disconnecting the USB mass storage class device.

•To disconnect the USB mass storage class device safely, turn off the System before disconnecting the device.

To play back disc/USB mass storage class device

To start:

Disc	USB mass storage class device

Playback starts.

To pause:	To stop:

To release it, press

DVD/CD 3 or

USB MEMORY 3.

While playing, this System can store the stop point (not applicable for CD). When you start playback again by pressing DVD/CD 3 or USB MEMORY 3, it starts from the position where you have stopped—Resume Play. (“RESUME” appears when you stop playback.)

To stop completely while Resume is activated, press 7 twice. (To cancel Resume, see “RESUME” on page 38.)