NordicTrack NTL2295 M.0 user manual Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver ,

standard screwdriver , and wire cutters . For help identifying the assembly hard- ware, see the hardware drawings below.

Cover Screw (90)–2

1” Tek Screw (82)

Star Washer (67)–12

 

Base Plate Bolt (125)–3

Handrail Bolt (66)–4

Short Console

 

Bolt (112)–2

 

Console Bolt (72)–2

Pulse Bar Bolt (13)–4

1.With the help of a second person, tip the Uprights (20) down to the position shown. Next, slide the treadmill out of the box.

Attach the four Base Pads (81) and two Plastic Spacers (37) to the bottom of the Uprights (20) with the four 1” Tek Screws (82) in the locations shown.

Thread the two Leveling Feet (130) into the bottom of the Uprights (20).

Insert the three Cage Nuts (128) into the three indicated holes in the treadmill. To insert each Cage Nut, first hook one side of the Cage Nut into a hole. Then use a stan- dard screwdriver to press the other side of the Cage Nut into the hole, as shown

1

82

 

 

 

37

 

 

82

 

81

 

 

 

81

 

130

 

82

 

 

37

 

128

20

 

 

 

 

130

 

 

128

6

Image 6
Contents QUESTIONS? Model No. NTL2295 M.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Page Uprights, and firmly tighten the four Handrail Bolts NotCut Page Chest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor TroubleshootingOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeFollow your progress with the display Measure your heart rate if desired Turn on the fans if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select one of the preset programsAdjust the intensity level of the program if Desired See on HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program HOW to USE a Heart Rate Program Enter a maximum target heart rate settingSelect a heart rate program Follow your progress with the displays HOW to Connect Your MP3 Player or CD Player HOW to Connect Your Portable StereoAudio Cable HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the Play button on your MP3 player, CD Player, or VCRMeasure your heart rate if desired Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot Information MODE/DEMO Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Problem The treadmill rocks during useProblem The chest pulse sensor does not function properly Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR0206A Qty DescriptionQty Exploded DRAWING-Model No. NTL2295 M.0 131 Ordering Replacement Parts