NordicTrack NTSA03991 Seat and Plate Assembly, Open the parts bag labeled Seat Assembly

Page 12

Seat and Plate Assembly

18.Open the parts bag labeled “SEAT ASSEMBLY.”

Attach the Seat (111) to the Seat Frame (106) with four 1/4” x 3/4” Bolts (130).

19.Attach the Backrest (134) to the Seat Frame (106) with four 1/4” x 3/4” Bolts (130).

20.Attach the Foot Press (107) to the Press Plates (108) with two 3/8” x 3 1/4” Bolts (124), eight 3/8” Washers (120), and two 3/8” Nylon Jam Nuts (122).

Note: All eight of the 3/8” Flat Washers (120) must be between the Press Plates (108) and the welded tube on the Foot Press (107).

18

106

111

130

19

134

130

106

20

108

 

 

107

 

124

 

120

 

120

 

122

12

Image 12
Contents QUESTIONS? Model No. NTSA03991 Serial NoTable of Contents Important Precautions Part Identification Chart Assembly Make Assembly Easier for YourselfFrame Assembly Press Uprights must be able to pivot freely Cable Assembly Open the parts bag labeled Cable AssemblyJam Nut the Cable must be able to pivot easily Make sure the Cable is routed in the direction shownAssembly Option a Page Assembly Option B Seat and Plate Assembly Open the parts bag labeled Seat AssemblyAdjustment Using the Leg Press AccessoryAdjusting the Seat Muscles affected quadriceps, gastrocnemiusWeight Resistance Chart Part List-Model No. NTSA03991NTSA03991 Ordering Replacement Parts Limited Warranty