Part Identification ChartÐModel No. NTBE01100 R1100A
M8 x 55mm Screw (16) | M8 x 16mm Screw (15) |
|
| M10 Nylon Locknut (19) | |
M10 x 70mm Bolt (20) |
|
|
| M10 | Washer (28) |
M10 x 90mm Carriage Bolt (21) |
|
|
M10 x 115mm Bolt (26) | M8 | Washer (27) |
|
| |
M10 x 165mm Bolt (18) |
|
|
Assembly
Before beginning assembly, carefully read the following information and instructions:
¥Assembly requires two people.
¥Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
¥Tighten all parts as you assemble them, unless instructed to do otherwise.
¥For help identifying the small parts, use the PART IDENTIFICATION CHART, above.
¥As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
The following tools (not included) are required for assembly:
¥ Two (2) adjustable wrenches
¥ One (1) rubber mallet
¥ One (1) standard screwdriver
¥ One (1) phillips screwdriver
¥Lubricant, such as grease or petroleum jelly plus soapy water.
Assembly will be more convenient if you have the following tools: A socket set, a set of
4