NordicTrack NTL07806.0 user manual

Page 24

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline sys- tem.

24

Image 24

Contents QUESTIONS? Model No. NTL07806.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedDo not fully fold the treadmill until it is com Pletely assembledAgain. if the Connectors are not CON Tighten the Extension Leg BoltsPage Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeAddition, make sure that your hands are clean Training Zones18. Note For simplicity, all instructions This section refer to milesTurn on the fan if desired Whenkey. you are finished exercising, removeHOW to USE a Preset Program Select one of the preset programsHOW to Create a Custom Program Follow your progress with the displaysSelect one of the custom programs HOW to USE a Custom Program HOW to USE AN Ifit Card Insert an iFIT Card and select a programUSER’S Mode HOW to Adjust the Cushioning System Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on Page Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0506A Qty DescriptionOrdering Replacement Parts Exploded DRAWING-Model No. NTL07806.0 Part 2 Part 3 Part 4 Limited Warranty