ParaBody 777 manual Base Plates

STEP 19:	FIGURE 19
• Assemble one 3-1/2” PULLEY (37) to the	3/8 X 1-3/4”	53		10
PULLEY PLATES (10) using one 3/8 X 1-
3/4” BOLT (53) and one 3/8” LOCK NUT				63
(63) as shown in FIGURE 19. (Note:
Loop the CABLE around the PULLEY
prior to assembling the PULLEY				37
PLATES.)
				30
FIGURE 20
			9
			30
3/8 X 3-3/4” 57	51
			37
			11	63

STEP 20:

•Assemble one 3-1/2” PULLEY (37) to the BASE PLATES (11) using one 3/8 X 3-3/4” BOLT (57), two 3/8 X 1” SPACERS (51) and one 3/8” LOCK NUT (63). See FIGURE 19.(Note: Loop the LEG CABLE (30) around the PULLEY prior to assembling the

BASE PLATES.)

•Screw the threaded end of the LEG CABLE (30) into the end of the PULLEY BRACKET (9). See FIGURE 20.

18