FIGURE 22 | | | |
| | | LOOP |
| | CABLE |
3/8 X 3-3/4” | 57 | 37 | 31 |
|
| | 51 | |
| | | 11 |
| | | 63 |
STEP 22:
•Assemble two 3-1/2” PULLEYS (37) to the BASE PLATES (11) using two 3/8 X 3-3/4” BOLTS (57), one 3/8 X 1” SPACER (51) and two 3/8” LOCK NUTS (63). See FIGURE 22.(Note: Loop the ARM CABLE (31) around the PULLEYS prior to assem- bling the PULLEYS. Leave a loop in the ARM CURL as shown!)
FIGURE 23 | | 63 |
3/8 X 1-3/4” | 53 | 9 |
| | 37 |
| | 31 |
STEP 23: | | |
•Assemble one 3-1/2” PULLEY (37) to the PULLEY BRACKET (9) using one 3/8 X 1-3/4” BOLT (53) and one 3/8” LOCK NUT (63) (Note: Loop the ARM CABLE (31) around the PULLEY prior to assembling the PULLEY BRACKET.)
20
