FIGURE 24 | 3/8 X 2-3/4” | 55 |
| 56 | 4 |
| |
31 | |
| | 6 |
63 | 39 | |
| 50 | |
4-1/2” 38 | |
3/8 X 2-3/4” | 55 | |
STEP 24:
•Route the ARM CABLE (31) through the RIGHT ARM (6) as shown in FIGURE 24.
•Assemble one 4-1/2” PULLEY (38) to the RIGHT ARM (6) using one 3/8 X 2-3/4” BOLT (55), two 3/8 X 1/2” SPACERS (50) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the
RIGHT ARM.)
•Assemble one V-PULLEY (39) to the RIGHT ARM SUPPORT (4) using using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the RIGHT ARM
SUPPORT.)
•SECURELY assemble one 2” NYLON SPACER (56) to the RIGHT ARM SUPPORT (4) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24.
•Assemble the RIGHT ARM (6) to the RIGHT ARM SUPPORT (4) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Make sure the ARM CABLE runs in FRONT of the bolt as shown!.)
21
