GBC PF3200 operation manual Stop, Safety Instructions, In case of EMERGENCY

SAFETY INSTRUCTIONS

CAUTION: PF-3200 has implemented secondary thermostat to prevent the glue tank temperature from going over

392°F (200°C). When it occurs, the power of PF-3200 will be automatically turned off. You have to wait for the glue tank to cool down before you can restart the machine. If this problem occurs again, call your authorized dealer for service.

In case of EMERGENCY:

1.Press the “EMERGENCY” button when you encounter a problem during operation or bookbinding. This will shut down all the actions of PF-3200, which include the stations and motors. Meanwhile, the LED DISPLAY of the control panel will display and flash the “STOP” symbol.

EMERGENCY

2.Correct the problem. Then turn the “EMERGENCY” stop button to the right in order to reset the machine. The “START” LED will be lit.

RESET

EMERGENCY

Note: You can use “OPEN” and “CLOSE” buttons to open or close the clamp at this time.

3.This will clear the problem on your PF-3200. Press the “START” button to restart your PF-3200. The LED display of the control panel will display and flash “LOAD BOOK”.

STAND BY		STOP		CLEAR
NOTCH	READY
	MANUAL			COUNTER
		CLOSE
FUNCTION	AUTO
	PAD	OPEN	START

Note: A. If you receive an error (ERR=Lx), please refer to the Appendix and follow the step 1 to 3 to reset your PF-3200.

B. Call for service if the error message is still there.

4

2

3

1

5

6

Figure 1

4