SETUP FOR TIMERS
To enter the timer setup menu, you will need to press and hold down both the “OPEN” and “CLOSE” buttons, then turn the power on. You should see “SET TR” in the LED DISPLAY. Press the “FUNCTION” button to sequentially display TR1, TR2, TR3, TR4, TR5, TR6, “SAVE”, “CANCEL”, and “RESET”. Once you have selected the setting to change, you need to press the “OPEN” to increase the time and the “CLOSE” to decrease the time within their ranges. Press “FUNCTION” button until you see “SAVE” in the LED DISPLAY. Then press the “START” button to change it. Or select “CANCEL” and press “START” button to exit. To return all settings to default, please use “RESET” followed by “START” button to recover the factory settings.
CAUTION: WE ONLY
RECOMMEND YOU TO
CHANGE TR1.
DEFAULT TIMES FOR TRX
Name | Default Time | Range | Description | |
TR1 | 4 sec. | 2.0 | - 10 sec. | Nipping time. |
|
|
|
|
|
TR2 | 1 sec. | 0.5 | - 5 sec. | Auto mode: After loading the cover, the |
|
|
|
| delay time before clamp station returns. |
|
|
|
|
|
TR3 | 2 sec. | 1.0 | - 5 sec. | Auto mode: Clamp closing time |
|
|
|
| for the book. |
|
|
|
|
|
TR4 | 1 sec. | 0.5 | - 5 sec. | Auto mode: Clamp opening time |
|
|
|
| for the book. |
|
|
|
|
|
TR5 | .5 sec. | 0.5 | - 5 sec. | Auto mode: The clamp detecting |
|
|
|
| time right after closing. |
|
|
|
|
|
TR6 | 5 sec. | 3.0 | - 10 sec. | Padding mode: The closing time of |
|
|
|
| clamp before opening it. |
|
|
|
|
|
The fastest speed of settings that AUTO mode can perform is: TR1 = 2 sec., TR2 = 0.5 sec., TR3 = 1 sec., TR4 = 0.5 sec., TR5 = 0.5 sec.
Note that the book making speed depends on thickness of the book and the loading technique for the paper and cover.
17
