GBC PF3200 operation manual Load, Stby, Standby Mode, Book

STANDBY MODE

Press “STANDBY” button, the PF-3200will temporarily lower the temperature of glue tank so it won’t burn the glue when the machine is not operated. The LED displays “STBY00” as shown below. Where “00” is the timer display for the duration of the standby period.

Press “STANDBY” button again when the “STANDBY” LED is on, the PF-3200will reheat the glue tank to the working temperature, then the “READY” LED will be lit and waiting for your desired operation.

Note that you have to wait a few minutes when LED displays “WARM00” status. The glue tank of PF-3200will be reheated, then the control panel will display and flash “LOAD BOOK” after “HOT” status.

STAND BY	LOAD		STAND BY	BOOK
			CLEAR			CLEAR
NOTCH	READY		NOTCH	READY
	MANUAL	CLOSE	COUNTER	MANUAL	CLOSE	COUNTER
FUNCTION	AUTO		FUNCTION	AUTO
	PAD	START		PAD	START
		OPEN			OPEN
STAND BY	STBY 00
			CLEAR
NOTCH	READY
	MANUAL	CLOSE	COUNTER
FUNCTION	AUTO
	PAD	START
		OPEN

Figure 10

14