GBC PF3200 operation manual Main Cordset Selection, Fcc Note, Equipment Maintenance Agreement

MAIN CORDSET SELECTION

FCC NOTE

EQUIPMENT MAINTENANCE AGREEMENT

(THE FOLLOWING NOTE APPLIES ONLY TO THE UNITS RATED 220V 50HZ.)

CAUTION: WHEN CHOOSING A DETACHABLE LINE CORD FOR USE WITH YOUR PF-3200,

ALWAYS OBSERVE THE FOLLOWING PRECAUTIONS:

The cordset consist of three parts; the attachment plug, cordage and appliance inlet. Each of these components must have European regulatory approvals for safety.

The following minimum electrical ratings for the specific cordset are published for safety purposes. DO NOT USE CORDSETS THAT DO NOT MEET THE FOLLOWING MINIMUM ELECTRICAL REQUIREMENTS.

PLUG: 3 ampere, 250 volts, 50/60 Hz, Class 1, 3 conductor, European safety approved.

CORDAGE: Type H03VV-F3G0.75, Harmonized ( < HAR > ). The “< >” symbols indicate cordage approved to appropriate European standard (NOTE: “HAR” may be substituted for approval mark of European safety agency which approved the cordage. An example would be “ < VDE > ”.)

APPLIANCE CONNECTOR: 3 ampere, 250 volts, 50/60 Hz, European safety approved, Type IEC 320. The cordset shall not exceed 3 meters in length. A cordset with component electrical ratings greater than the minimum specified electrical ratings may be substituted.

(THE FOLLOWING NOTE APPLIES ONLY TO THE UNITS RATED 115V 60HZ.)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Operator Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

CAUTION: CHANGES

OR MODIFICATIONS NOT

EXPRESSLY APPROVED

BY GENERAL BINDING CORPORATION COULD VOID YOUR AUTHORITY TO OPERATE THE EQUIPMENT.

This Class A digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.

By purchasing the PF-3200, you have invested in a highly capable binding machine that will give you years of reliable service. To help protect this investment be certain to take advantage of the GBC Equipment Maintenance Agreement (EMA). The EMA provides your PF-3200with proper ongoing maintenance and care, helping to ensure the years of quality performance and long life built into the machine. Without an EMA, a charge for time and labor would result from every normal maintenance or repair service call. An EMA for your PF-3200eliminates this possibility by providing you with a low, fixed annual cost for protecting your valuable machine investment. For full details about purchasing an EMA, contact your local GBC Branch Office or contact:

General Binding Corporation

500 Bond Street

Lincolnshire, IL 60069

Or Call: 1-800-790-7787

3