ParaBody GS6 manual 15 3/8 X 2-3/4

15 3/8 X 2-3/4”

23

AF

AG

28

FIGURE 13

STEP 13:

•SECURELY assemble the PIVOTASSEMBLY (AG) to the SEAT FRAME (AF) using two 3/8 X 2-3/4” BOLTS (15), two 3/8” WASHERS (23) and two 3/8” LOCK NUTS (28) as shown in FIGURE 13.

FIGURE 14

J

26

M

4 1/2 X 4-1/4”

STEP 14:

•Assemble the BENCH TUBE (J) to the SEAT ADJUST (M) using one 1/2 X 4-1/4” BOLT (4) and one 1/2” LOCK NUT (26). (Note:

Tighten this connection enough to remove excess play yet allow the BENCH TUBE to rotate freely.)

16