ParaBody GS6 manual X 3-3/4 X 1-3/4

Page 29

 

 

28

 

3/8 X 3-3/4” 11

23

 

 

51

 

 

E

 

 

42

W

AY

(a)

 

 

 

28

 

 

49

 

 

L

 

3/8 X 1-3/4” 17

 

 

 

(b)

 

 

FIGURE 31

STEP 31:

Securely assemble the ball end of the AB CRUNCH CABLE (AY) and one 4-1/2” V-PULLEY (51) to the FRONT FRAME (E) using two 3/8 X 3-3/4” BOLTS (11), two 3/8 X 19/32” FLANGE SPACERS (42), two 3/8” WASHERS (23) and two 3/8” LOCKNUTS (28).

See FIGURE 31(a) (NOTE: TheAB CRUNCH CABLE (44) should be routed underneath the retaing bolt as shown in FIGURE 31.)

Route theAB CRUNCH CABLE (AY) around one 3-1/2” PULLEY (49) and assemble the 3-1/2” PULLEY (49) to the PULLEY PLATES (L) using one 3/8 X 1-3/4” BOLT (17) and one 3/8” LOCK NUT (28). See FIGURE 31(b)

Screw the threaded end of the AB CABLE (AY) into the end of the FLOATING PULLEY BRACKET (W) .See FIGURE 31.

29

Image 29
Contents GS6 GYM System Important Safety Information Important Notes Components Parts List Hardware Parts List Step X 4 Step Page Optional LB. ADD-ON KIT GS-6 Shroud Option only Step Securely 2 X 2 X 92mm Step Figur E 15 3/8 X 2-3/4 Step PEDESTALto rotate freely Step X 7-1/4 X 3-1/2 Leftpressarm Handle Q to rotate freely 11 3/8 X 3-3/4 15 3/8 X 2-3/4 X 2 X 3-3/4 X 1-3/4 11 3/8 X 3-3/4 X 3-1/4 X 3-3/4 Base Plates Pulley prior to assembling the Pulley to the Base X 5-3/4 15 3/8 X 2-3/4 17 3/8 X 1-3/4 X 3-3/4 X 1-3/4 Adjustment Tighten JAM NUT Securely Maintenance Limited Warranty Life Fitness Consumer Division