Reebok Fitness RBTL09506.0 manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver , rubber

mallet , and adjustable wrench . For help identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 30 and 31. The number following the parentheses is the quantity needed for assembly.

Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hard- ware may be included.

5/16” Star

3/8” Star

 

Extension Leg

Washer (99)–4

Nut (20)–2

Nut (91)–4

Washer (67)–4

 

 

 

3/4” Screw (7)–6

Base Cover Screw (63)–4

 

 

 

 

Latch Bolt (101)–2

1” Tek Screw (82)–8

Console Bolt (72)–4

 

Extension Leg Bolt (87)–4

 

 

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

With the help of a second person, carefully tip

 

 

 

the treadmill onto its side as shown. Partially fold

 

 

 

the Frame (55) so that the treadmill is more sta-

 

Bracket

85

ble. Do not fully fold the Frame until the

 

 

 

 

 

treadmill is completely assembled.

 

99

 

Insert an Extension Leg (97) into the indicated

87

 

 

 

 

 

 

bracket on the base of the Uprights (85). Make

 

 

 

sure that the Extension Leg is turned so the Base

 

 

 

Pad (81) is on the side shown. If necessary, use

 

 

 

a rubber mallet to align the holes in the

 

 

91

Extension Leg with the holes in the bracket.

 

 

 

Attach the Extension Leg (97) with two Extension

 

97

 

Leg Bolts (87), two 5/16" Star Washers (99), and

 

81

 

two Extension Leg Nuts (91) as shown. Firmly

55

 

 

tighten the Extension Leg Bolts.

 

 

 

 

 

 

6

 

 

Image 6
Contents Call TOLL-FREE QUESTIONS?Model No. RBTL09506.0 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedTighten the Extension Leg Bolts Page Sleeve to make sure it is locked into Place 10a 10b Console Assembly Make sure that no wires are pinched. See Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the user mode HOW to Turn on the PowerHOW to Personalize Console Settings Enter user informationSelect the settings mode HOW to USE the Manual Mode Measure your heart rate if desired Turn on the fan if desiredHOW to USE a Cardio Program Select a Cardio programPress the Start button to start the program See on HOW to USE a Pulse Program Adjust the maximum target heart rate setting if DesiredSelect a Pulse program Turn on the fan if desired HOW to Create a Record Program Select a Record programHOW to USE a Record Program HOW to USE AN Ifit Card Insert an iFIT Card and select a programPage HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR1206A Qty DescriptionQty Exploded Exploded Drawing B-Model No. RBTL09506.0 R1206A Exploded Drawing C-Model No. RBTL09506.0 Exploded Drawing D-Model No. RBTL09506.0 R1206A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT