Trouble Shooting Guide
Symptom | Possible Cause | Solution | |
|
|
| |
| DC adapter is not plugged into | Plug DC adapter into wall outlet | |
| wall outlet? | ||
|
| ||
|
|
| |
| DC adapter cord is not | Plug DC adapter cord into ADVENTURE power socket | |
Console has no power | plugged into ADVENTURE? | ||
| |||
|
|
| |
| Console cable is not | Verify that console cable is connected properly | |
| connected? | ||
|
| ||
|
|
| |
| The computer is faulty? | Call the Ironman Fitness service number | |
|
|
| |
|
| Check that the sensor magnet is correctly fitted and | |
|
| passes in front of the sensor | |
|
|
| |
| Computer isn't receiving a | Check that the gap between sensor and the magnet | |
| is 3mm or less | ||
| signal from the sensor? | ||
Strides/Min or Speed |
| ||
Check that all the computer plugs and sockets are | |||
| |||
shows 0 |
| ||
| correctly and firmly connected | ||
|
| ||
|
|
| |
|
| Check that the computer wires are not damaged | |
|
|
| |
| The sensor is faulty? | If all above checks are okay, then replace sensor | |
|
|
| |
| The computer is faulty? | Call the Ironman Fitness service number | |
|
|
| |
|
| Check that the pulse plugs are firmly inserted into | |
No HR signal or incorrect | Computer is receiving a faint | the sockets | |
| |||
HR signal | or intermittent pulse signal | If problem still exists then call the Ironman Fitness | |
|
| ||
|
| service number | |
|
|
| |
| Symptoms include an |
| |
| unusually loud noise coming | Try reversing the resistance and try again. If this | |
Noise from motor | from the motor, which means | ||
fails, then replace the motor. | |||
| the gears are not meshing | ||
|
| ||
| correctly |
| |
|
|
|
CLEANING/MAINTENANCE -
Your Adventure Elliptical has been manufactured to withstand many hours of use with mini- mal maintenance.
Periodically wipe down your machine with mild, soapy water or a diluted general purpose household cleaner. Machine should be wiped down to remove sweat after each use.
19