Life Fitness SM61 manual Mount the benches to the frame

Page 11

SM61 Unpacking & Assembly Instructions

Use a pinch bar to align the seat frame holes to the cubes

Figure 13. Mount the benches to the frame.

Figure 14. Bolt the benches to the frame.

11

Image 11

Contents M051-K50-A137 Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contents box 1 on left, box 2 on rightSM61 main components AssemblySet the weight stack cubes Configuration for 2-3/4 and 3 bolts Mount lat tops and tricep tops Mount rubber bumpers and the weight stacks Bolt on the top plate Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Removing the pulley bolts Installing the CablesAdjustable Crossover Cable Routing Adjustable crossover cable end detail LAT Pulldown Cable Routing Tricep pushdown cable routing Hardware Hardware . Assembly PartsHardware . Rubber caps Hardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulleys Hardware . Weight stack rubber bumpersParts List Floating pulley InstalledHardware installed Pulley hardware