Life Fitness SM61 manual Adjustable Crossover Cable Routing

Page 13

SM61 Unpacking & Assembly Instructions

ADJUSTABLE CROSSOVER CABLE ROUTING

Once you’ve removed the pulleys as described previously, route the three adjustable crossover cables as shown in Figure 16.

Figure 16. Adjustable crossover cable routing.

13

Image 13

Contents M051-K50-A137 Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contents box 1 on left, box 2 on rightSM61 main components AssemblySet the weight stack cubes Configuration for 2-3/4 and 3 bolts Mount lat tops and tricep tops Mount rubber bumpers and the weight stacks Bolt on the top plate Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Removing the pulley bolts Installing the CablesAdjustable Crossover Cable Routing Adjustable crossover cable end detail LAT Pulldown Cable Routing Tricep pushdown cable routing Hardware Hardware . Assembly PartsHardware . Rubber caps Hardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulleys Hardware . Weight stack rubber bumpersParts List Hardware installed InstalledPulley hardware Floating pulley