Life Fitness SM60 manual Crossover Cable Routing

Page 13

SM60 Unpacking & Assembly Instructions

CROSSOVER CABLE ROUTING

Once you’ve removed the pulleys as described previously, route the two crossover cables as shown in Figure 16.

Figure 16. Crossover cable routing.

Bolt the cable to the weight stacks as shown in Figure 17. Thread the 7/8” nut up on the cable bolt as shown at left. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” combination wrench.

Image 13

Contents M051-K50-A136 Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contents box 1 on left, box 2 on rightSM60 main components AssemblySM60 Unpacking & Assembly Instructions Bolt on the teardrop pulleys Configuration for 2-3/4 and 3 bolts 150 lb. weight stack 300 lb Weight stack Bolt on the top plate SM60 Unpacking & Assembly Instructions Mount the benches to the frame Removing the pulley bolts Installing the CablesCrossover Cable Routing LAT Pulldown Cable Routing Tricep Pushdown Cable Routing Hardware Hardware . Assembly PartsHardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulleys Hardware . Weight stack rubber bumpersParts List Hardware installed InstalledPulley hardware Floating pulley