Life Fitness SM60 manual Materials and Tools Required for Assembly, Assembly Time

Page 2

SM60 Unpacking & Assembly Instructions

The SM60 comes partially assembled. Follow the steps below to complete the assembly.

WARNING: COMPONENTS OF THE SM60 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE.

MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY

1/2”, 3/8”, 5/8” & 9/16”

1/8”

5/8” & 9/16”

Pinch bar

Socket wrench with

hex key wrench

Combination wrench

 

extension

 

 

 

You will also need a piano dolly to lift and position the weight stacks and a ladder.

ASSEMBLY TIME

Two people can accomplish this assembly in approximately 2 hours.

2

Image 2
Contents M051-K50-A136 Materials and Tools Required for Assembly Assembly TimeParts box contents box 1 on left, box 2 on right UnpackingAssembly SM60 main componentsSM60 Unpacking & Assembly Instructions Bolt on the teardrop pulleys Configuration for 2-3/4 and 3 bolts 150 lb. weight stack 300 lb Weight stack Bolt on the top plate SM60 Unpacking & Assembly Instructions Mount the benches to the frame Installing the Cables Removing the pulley boltsCrossover Cable Routing LAT Pulldown Cable Routing Tricep Pushdown Cable Routing Hardware . Assembly Parts HardwareHardware . Cable jam nut Hardware . CablesHardware . Top assemblies Hardware . Weight stack rubber bumpers Hardware . Floating pulleysParts List Pulley hardware InstalledHardware installed Floating pulley