Smith Machine PL06 Unpacking & Assembly Instructions
1 2 3
Person 1- Holds right side
Person 2- Holds left side
Person 3- Moves around and assembles
At this stage, three people are required to uncrate the PL06 because the sides are very heavy and not stable until they are bolted to the front and back braces. Throughout these instructions, Person 1 refers to the person who holds the right side. Person 2 refers to the person who holds the left side. Person 3 refers to the person who moves around and uncrates.
WARNING: THE STEP BELOW REQUIRES THREE PEOPLE. SOMEONE NEEDS TO BE HOLDING EACH SIDE OF THE PL06 UNTIL THE BACK AND FRONT BRACES HAVE BEEN SECURED TO THE SIDES. THE SIDES WILL BE LOOSE AND FREE TO FALL WHEN THE LAG BOLTS FROM THE SHIPPING CRATE HAVE BEEN REMOVED.
3.Remove the upper shipping board. With Person 1 holding the right side and Person
2holding the left side, Person 3 will remove the upper shipping board (shown in Unpacking Figure 4) using a ½” socket wrench. Discard the board, lag bolts, and the protective fabric scraps.
Unpacking Figure 4. Removing the upper shipping board.
4