FIGURE 6 | |
6 | |
6 | |
23 | |
20 | |
22 | |
1/2 X 4-1/4” 26 | |
4 | 4 |
|
23 | |
20 | |
22 | 2 |
|
26 1/2 X 4-1/4” | |
1 | |
STEP 6:
•LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) using four 1/2 X 4-1/4” BOLTS (26), four 1/2” PLASTIC DOME WASHERS (22), four 1/2” INT TOOTH LOCK WASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 6.
•LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOLTS (26), four 1/2” PLASTIC DOME WASHERS (22), four 1/2” INT TOOTH LOCK WASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 6.
9