JVC MX-D402T manual Troubleshooting, Symptom, Possible Cause, Action

Page 36

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

Possible Cause

Connections are incorrect, or loose.

Cassette record protect tabs are removed.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the Unit.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The main AC power cord is not plugged in.

The CD is upside down.

The built-in microprocessor has malfunc- tioned due to external electrical interference.

During tape playing, the power cord was unplugged.

Action

Check all connections and make correc- tions. (See pages 4 - 5.)

Cover holes on back edge of cassette with tape.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

•Remove the obstruction.

•Replace the batteries. Plug in the AC power plug.

Put the CD in with the label side up. Unplug the Unit then plug it back in.

Plug in the power cord, press POWER, and then press 0.

34

Image 36

Contents MX-D402T Important for Laser Products Features Installation of the UnitPower cord How This Manual Is OrganizedTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable not suppliedConnecting the Speakers Connecting Auxiliary EquipmentVCR or other equipment Right SpeakerOn the Remote Control On the UnitCompu Play buttons Demo Mode Common OperationsDisplay Setting the Clock Turning the Power On and OffAdjusting the Volume Turning the System OnReinforcing the Bass Sound Sound ModesCustomizing a Sound Mode Changing the DisplayTurn down the volume level to Press AUX Listening to Auxiliary EquipmentUsing the Tuner Tuning in a StationSwitching between Frequency Bands On the Unit Press FM/AMPresetting Stations Changing the FM Reception ModeThree Ways to Select a Station Using the CD Player Entering CD Operation Mode with the Remote ControlDisc indicator CD indicatorBasics of Using the CD Player Continuous Play Loading CDsPlaying a CD Locating a Track with the Remote Control Directly Selecting a TrackFast Forward / Reverse Changing Discs While PlayingOn the Remote Control Press PROGRAM/RANDOM on the Unit Programing the Playing Order of the TracksSelect a disc with Disc 1 to Track numberRandom Play Checking the ProgramChanging the Program Press the number keys 1 to 10 and +10 to select the tracksRepeating a Track or the Discs Tray Lock FunctionLocking the Trays Unlocking the TraysUsing the Cassette Deck Entering the Tape Operation Mode with the Remote ControlTape Direction Indicator on the Display Tape ª £Regular Play Music ScanFast Left And Fast Right Finding the Beginning of the Current SelectionReverse Mode Reverse Mode on Reverse Mode OFFRecording Things to Know before You Start RecordingStandard Recording Check the recording direction for the tapePress Tape Control then press To pause at any time during the recording processCD Direct Recording Auto Edit RecordingRecording AM Station to Tape How to Use Dubbing Tape to Tape Recording DubbingPress Dubbing To stop dubbing, press 7STOPUsing the Timer SleepSetting the Daily Timer Press TIMER/CLOCK againSet the time you want the Unit to turn on Set the time you want the Unit to turn offTurning the Daily Timer On and Off Setting the volume levelTo change the Daily Timer setting To use a Cassette Deck as the sourceSetting the Recording Timer Setting the Sleep Timer Turning the Recording Timer On and OffTo change the Recording Timer setting To change the Sleep Timer settingTimer Priority Example Setting OperationRecording Timer Sleep TimerCare and Maintenance Troubleshooting SymptomPossible Cause ActionSpecifications HOW to Locate Your JVC Service Center Don’t service it yourselfLimited Warranty AUDIO-1 0398TNMNATJEM