STEP 6:
Uncoil cables to remove all twists.
Remove the UPPER PULLEYS (H) on the RIGHT TOWER (11) and LEFT TOWER (1) by removing the M10 x 50mm SCREW (I), PULLEY RETAINER (J), M10 SOCKET HEAD NUT (K), and PARTIAL PULLEY COVERS (L). Set the UPPER PULLEYS (H) and hardware aside.
Remove the LOWER PULLEYS (M) on the RIGHT TOWER (11) and LEFT TOWER by removing the M10 x 55mm SCREW (N), M10 WASHERS (O), and M10 HEX NYLOCK NUT (P).
12