Life Fitness manual CM3 Shroud Option only

Page 14

36

18

23

21

28

33

CM3 SHROUD

OPTION ONLY!

4

FIGURE 5

STEP 5:

A.Insert two Guide Rods (18) into the Rear Base (4) as shown in Figure 5. (Note: If you purchased the CM3 Shroud Option, place the Guide Rods (18) through the Bottom Shroud Bracket (found in Shroud Option box) and into the Rear Base (4) as shown in Figure 5.)

B.Lubricate Guide Rods (18) with silicon lube included with gym, or a silicon or teflon lube spray.

C.Slide two Weight Stack Spacers (33) and two Weight Stack Cushions (28) over Guide Rods (18).

D.Using extreme care, slide all fifteen Weight Plates (21) over the Guide Rods (18) and down onto the Weight Stack Cushions (28). Make sure the Weight Plates (21) all face as shown.

E.Slide the Head Plate Assembly (23) down the Guide Rods (18), onto the weight plate stack.

F.Slide two Shaft Collars (36) over the Guide Rods (18) as shown in Figure 5.

14

Image 14
Contents CM3 GYM System Table of Contents Important Notes Square = 1 X Parts List Cable END Assembly P13-0112-2 P13-0112-1 P13-0112-5 P13-0112-4 Step 68 3/8 X 4-1/4 57 3/8 X 3-3/4 Page CM3 Shroud Option only Igure Step Spring PIN Step Step Step Step Turn Buckle Step Step Step Step Step X 1-1/4 Step Maintenance Warranty Hong Kong